Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5391

Rancho

Shop Nissan Pathfinder Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5391 rear shock for the 1998–2004 Nissan Pathfinder LE and SE
  • Gas charged hydraulic shock with ten-stage velocity sensitive valving
  • Piston rod 5/8-in. (16mm) and piston 1 3/8-in. (35mm) diameter
  • Red protective boot included, sold as each

Description

Overview

The Rancho RS5391 is a rear shock absorber in the RS5000 Series for the 1998–2004 Nissan Pathfinder in LE and SE trim. Rancho built it as a gas charged hydraulic unit for sport utility vehicles that run on pavement and dirt alike, and it is engineered for both stock and raised vehicles.

The series has been used on light trucks and SUVs since 1985. Ten-stage velocity sensitive valving gives the RS5391 damping that changes with shock speed. Its piston rod is 5/8-in. (16mm) in diameter and its piston is 1 3/8-in. (35mm).

Because the RS5391 is sold as each, one unit covers one corner of the rear suspension. A rear axle with two shocks needs two units, and Rancho’s limited lifetime warranty applies to the shock.

Key features

  • Rear position, gas charged hydraulic shock
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16mm) diameter piston rod
  • 1 3/8-in. (35mm) diameter piston
  • Red protective boot included
  • Built for stock and raised vehicles, with a 0 in. lift/drop setting.
  • Limited lifetime warranty from Rancho

Rear shock replacement tips

Rear shocks control how quickly the rear springs compress and rebound, which affects traction, braking stability and comfort on uneven surfaces. A gas charged design helps the damping stay consistent when the shock heats during long drives. Ten-stage valving gives progressive resistance, so the shock responds differently to slow body motion and sharp impacts.

Before installing, clean the mounting surfaces and check the bushings, washers and nuts. Rear axles often bounce unevenly when one side is worn, so replacing both rear shocks at the same time keeps the truck level under load. Torque fasteners to the specification for your vehicle.

  • Inspect the boot for tears before installation
  • Check upper and lower bushings for cracking
  • Replace both rear shocks on the same axle
  • Expect a short break-in period after installation

Specifications

Brand Rancho
Part number RS5391
UPC 10039703002940
Series RS5000 Series
Position Rear
Fitment type Direct fit
Shock type Hydraulic, gas charged
Valving Ten-stage velocity sensitive
Piston rod diameter 5/8-in. (16mm)
Piston diameter 1 3/8-in. (35mm)
Lift height 0 in. lift/drop
Included Red protective boot
Sold as Each

Vehicle fitment

It fits the 1998–2004 Nissan Pathfinder in LE and SE trim. Pathfinder years before 1998 and trims beyond LE and SE fall outside this fit.

The 1996–1998 Pathfinder and the 2000–2004 Xterra are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One RS5391 rear shock from Rancho’s RS5000 Series, delivered with its red boot in place.

SKU: RANRS5391 Category:

Specification

Shipping weight 7.30 lbs
Package dimensions 24.30 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Nissan Pathfinder1998–2004LE, SE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rancho RS5391 fit a 1996 Nissan Pathfinder?

No. It fits the 1998 through 2004 Nissan Pathfinder in LE and SE trim. A 1996 model year falls outside that range, so confirm your vehicle's year and trim before ordering.

What type of shock is the RS5391?

The RS5391 is a gas charged hydraulic shock absorber for the rear position, with ten-stage velocity sensitive valving. Its piston rod measures 5/8-in. (16mm) and its piston measures 1 3/8-in. (35mm).

Does the RS5391 include a boot?

Yes, a red protective boot comes with the shock. The unit is sold as each, so a rear axle with two shocks needs two separate units.

What are the RS5391 part number and UPC?

The part number is RS5391 and the UPC is 10039703002940. It belongs to Rancho's RS5000 Series, a line the company says has been in use since 1985.

Should both rear shocks be replaced together?

Usually yes. Shocks on the same axle should match so damping is even from side to side. If one shock is worn, the other is often close to the same age and condition, so replacing both keeps handling predictable.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Nissan Pathfinder Shock Absorbers on Amazon