Overview
The Rancho RS7833 is a front RS7000MT Monotube shock for the 2009–2013 Ford F-150, listed in the King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims. Rancho rates this shock for w/6 in. Lift.
The monotube body is gas charged for heat dissipation. The damping is sensitive and reacts quickly to a wide range of off-road obstacles, and the body is 2 inch in diameter.
Key features
- Front shock position
- Lift rating of w/6 in. Lift
- Gas-charged monotube construction
- Sensitive damping for off-road obstacles
- 2 inch shock body
- Brushed-zinc clear-coated finish
On the trail
Trail driving puts a shock through long compression strokes and quick reversals, so the rod seal, bushings and mounts take more load than they do on pavement. Sensitive damping can help keep the tires planted over rocks and roots, but it works best when the shock is in good condition and the mounts are tight.
If you drive the same route often, watch the rod for pitting or scratches, since debris can damage the seal and cause leaks. Wipe dust from the rod after muddy runs and check the bushings for cracks. Front shocks are often replaced in matched sets so the ride stays even from one corner to the next.
- Wipe the rod after mud or sand runs
- Check bushings and hardware after the first trail trips
- Replace shocks in pairs for even handling
Specifications
| Brand | Rancho |
|---|---|
| Product line | RS7000MT Series |
| Part number | RS7833 (RANRS7833) |
| UPC | 39703005579 |
| Position | Front |
| Lift height | w/6 in. Lift |
| Body diameter | 2 inch |
| Gas charge | Gas charged |
| Finish | Brushed-zinc clear coat |
| Origin | Made in America |
Vehicle fitment
The manufacturer fitment list covers the 2009–2013 Ford F-150 in the King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims.
Trucks from other years and other Ford models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rating is w/6 in. Lift, confirm the setup matches before installing, and have the front alignment checked afterward.
What’s included
Confirm the mounting hardware, boots and bushings your installation needs before starting the job.












