Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5393

Rancho

Shop Nissan Xterra Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5393 rear shock for the 2000–2004 Nissan Xterra SE and XE
  • RS5000 Series gas charged hydraulic shock with ten-stage velocity valving
  • 5/8-in. (16mm) piston rod and 1 3/8-in. (35mm) piston
  • Red protective boot included, sold as each

Description

Overview

The Rancho RS5393 is a rear RS5000 Series shock absorber made for the 2000–2004 Nissan Xterra in SE and XE trim. Its gas charged hydraulic body suits light trucks and sport utility vehicles that drive on paved and unpaved roads.

Rancho designed the RS5000 line to work on stock and lifted vehicles, and the RS5393 follows that design. The ten-stage velocity sensitive valving adjusts damping by shock speed, so the shock reacts differently to slow body movement than to quick impacts from rough ground.

The shock has a 5/8-in. (16mm) diameter piston rod and a 1 3/8-in. (35mm) diameter piston. A red protective boot is included, and it is built for 0 in. lift/drop, which places it in the stock-height category.

Key features

  • Gas charged hydraulic shock for the rear
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16mm) diameter piston rod
  • 1 3/8-in. (35mm) diameter piston
  • Red protective boot included
  • Direct fit design with 0 in. lift/drop
  • Covered by a limited lifetime warranty

Choosing a replacement rear shock

A rear shock absorber controls how the axle and body move after a bump, and it works with the springs to keep the tires in contact with the ground. When a shock wears out, the vehicle tends to bounce after dips, sway in turns and feel loose on washboard surfaces. Replacing rear shocks in pairs keeps the ride even from side to side, which matters on a truck that carries loads or tows.

Valving is the internal part that sets damping force, and velocity sensitive designs respond differently to slow suspension movement than to fast impacts. Before buying, match the shock to the vehicle’s year, model and trim and confirm the mounting ends fit the existing brackets. Inspect the old shock for oil leaks, a dented body or cracked bushings, since those signs point to a worn unit.

  • Look for oil on the shock body
  • Check the bushings and mounting hardware
  • Replace rear shocks in pairs

Specifications

Brand Rancho
Part number RS5393
UPC 39703002967
Series RS5000 Series
Position Rear
Fitment type Direct fit
Shock type Hydraulic, gas charged
Valving Ten-stage velocity sensitive
Piston rod diameter 5/8-in. (16mm)
Piston diameter 1 3/8-in. (35mm)
Lift height 0 in. lift/drop
Included Red protective boot
Sold as Each

Vehicle fitment

It fits the 2000–2004 Nissan Xterra in SE and XE trim. Confirm fit for your vehicle’s year, model and trim before ordering.

Pathfinder and Titan applications are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One RS5393 rear shock absorber with its red protective boot, sold as each.

SKU: RANRS5393 Category:

Specification

Shipping weight 7.28 lbs
Package dimensions 24.30 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Nissan Xterra2000–2004SE, XE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the RS5393 a direct fit for a 2000 Nissan Xterra SE?

Yes, it fits the 2000 through 2004 Nissan Xterra in SE and XE trim, and it is a direct fit design. Confirm your trim before you order, since only SE and XE trims are covered.

What are the piston rod and piston sizes on the RS5393?

The piston rod is 5/8-in. (16mm) in diameter and the piston is 1 3/8-in. (35mm) in diameter. The shock uses ten-stage velocity sensitive valving in a gas charged hydraulic design.

Does the RS5393 come with a protective boot?

Yes. A red protective boot is included with the shock. It is sold as each, so one unit covers one shock absorber position.

Is the RS5393 a lift part?

No. The lift height is shown as 0 in. lift/drop, meaning it is designed for stock ride height. It is one rear shock absorber, not a lift kit.

How can I tell if a rear shock needs replacing?

Look for oil on the body, a bouncy ride after dips, uneven tire wear or a clunk over bumps. Check the mounts and bushings too, since worn hardware can mimic a bad shock.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Nissan Xterra Shock Absorbers on Amazon