Overview
The Rancho RS55286 is a rear shock absorber from the RS5000X Series. It fits the 2004–2013 Ford F-150, the 2004 Ford F-150 Heritage and the 2006–2008 Lincoln Mark LT.
It is labeled Direct Fit with 0 in. lift or drop. Its design uses a rebound valving system and an advanced compression phase developed by Rancho’s ride engineers, for handling on and off road.
Key features
- Rear-position shock from the RS5000X Series
- Patented rebound valving system
- Advanced compression phase
- Labeled Direct Fit, with 0 in. lift or drop
Half-ton F-150 rear ride
A rear shock on a half-ton pickup controls axle motion over ruts, expansion joints and while carrying a payload. It has to work with the rear springs, so the ride feel depends on how well the two match. A shock that is too firm can make an empty bed feel jittery, while a worn one lets the rear sway after bumps.
Owners of either truck should inspect the upper and lower mounts, watch for fluid on the body and check the bushings for splits. Replacing both rear shocks at once keeps the rear end level, and the spring seats and bump stops are worth checking during the same job. Heavy hauling puts extra stress on these parts, so a periodic check pays off.
- Oil on the shock body
- Split or hardened bushings
- Worn upper and lower mounts
- Replace both rear shocks together
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55286 |
| UPC | 39703006552 |
| Position | Rear |
| Shock series | RS5000X Series |
| Fitment type | Direct Fit |
| Lift/drop | 0 in. |
Vehicle fitment
It fits the 2004–2013 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims. It fits the 2004 Ford F-150 Heritage in XL and XLT trims, and the 2006–2008 Lincoln Mark LT in Base trim.
Ford F-150 model years outside 2004–2013 and Lincoln models other than the Mark LT are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Verify the hardware kit before you start the install.












