Overview
The Rancho RS5117 is a front gas-charged shock absorber in the RS5000 Series, with a lift rating of w/0 in. Lift/Drop. It fits the 1966–1996 Ford Bronco, the 1977–1996 Ford F-150, the 1980–1996 Ford F-250 and the 1983–1992 Ford Ranger.
The list also covers the 1980–1983 Ford F-100, the 1993–1995 Ford F-150 Lightning, the 1971 International Scout, the 1971–1980 International Scout II, and the 1975 International Travelall 150 and 200. The RS5117 uses ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston.
Key features
- Front position, gas-charged design
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot included
Fitting older trucks
Shocks on older body-on-frame trucks and classic utility vehicles do much of their work on the front axle, where the leaf springs and steering linkage share the load. A front shock that has lost damping can cause the steering to feel light, add bounce over rough ground and make the front tires wear unevenly. Gas-charged bodies keep damping more consistent as the unit warms during longer drives.
Vehicles from the late 1960s and 1970s often have worn eye bushings, rusted mounting brackets and stretched bolt holes. Clean and inspect the brackets before installing a new shock, and replace any bushings that show cracking or play. Sway bar links and tie rod ends are common companions to a front shock job on older trucks.
- Clean mounting brackets and check for rust
- Replace cracked or worn eye bushings
- Inspect tie rod ends and sway bar links
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5117 |
| UPC | 10039703511701 |
| Series | RS5000 Series |
| Position | Front |
| Charge | Gas charged |
| Valving | Ten-stage, velocity sensitive |
| Piston rod diameter | 5/8 in. (16 mm) |
| Piston diameter | 1 3/8 in. (35 mm) |
| Lift rating | w/0 in. Lift/Drop |
| Fitment type | Direct fit |
| Warranty | Limited lifetime (Rancho) |
| Quantity | Each |
Vehicle fitment
The RS5117 fits 1966–1996 Ford Bronco (Base, Custom, Eddie Bauer, Northland, Ranger, Ranger XLT, Roadster, Wagon, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport); 1975–1977 Ford Bronco Sport; 1980–1983 Ford F-100 (Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT Lariat); 1977–1996 Ford F-150 (Base, Custom, Eddie Bauer, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1993–1995 Ford F-150 Lightning; 1980–1996 Ford F-250 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1983–1992 Ford Ranger (Base, Custom, S, S Plus, STX, Sport, XL, XLS, XLT); 1971 International Scout (Base); 1971–1980 International Scout II (Base, SS2, Terra, Traveler, XLC); 1975 International Travelall 150; and 1975 International Travelall 200.
Ford Ranger years from 1993 onward and F-150 years outside 1977–1996 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Several listed models are older, from 1966 to 1980, so confirm that the mounting points on your truck match before fitting the RS5117.
What’s included
Supplied: one RS5117 front shock with a red protective boot.









