Overview
It is a gas-charged rear RS9000XL shock absorber, part number RS999143, for a 4 in. lift. It fits 1961 to 1973 Dodge W100 and W200 pickups, the 1967 Dodge W300, and 1984 to 1985 Toyota 4Runner and Pickup models.
It has a 2.75 in. body, an 18mm chrome rod, 9-position manual or remote tuning, polyurethane bushings and a liquid metallic finish. It comes with a limited lifetime warranty.
Key features
- Rear-position shock for a 4 in. lift.
- 9-position manual or remote tuning.
- 18mm chrome rod on a 2.75 in. (70mm) body.
- Nitrogen gas charged with a liquid metallic finish.
- Polyurethane bushings and a protective boot.
Measuring before installation
Older trucks and utility vehicles often have mounts that have been worn, bent or repaired over the years, so the first step is to measure what is already there. Compare the shock’s extended and compressed lengths with the old unit, and look at the eye and stud ends to make sure they will seat properly. Taking a few minutes to measure saves a return trip to the parts counter.
With a 4 in. lift, the rear axle sits in a different place, so the shock works through a different part of its stroke. Check that the shock does not contact the frame, the spring or the axle at full compression, and that the brake lines and fuel lines have room to move. Rust on the frame brackets is worth a close look before bolting anything in.
- Measure eye-to-eye length at full extension
- Check the upper and lower mounts for rust
- Inspect the rubber bushings before reusing hardware
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999143 |
| UPC | 10039703091432 |
| Shock series | RS9000XL |
| Position | Rear |
| Lift height | 4 in. |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position, manual or remote |
| Gas charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Bushings | Polyurethane |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
Rancho’s manufacturer list covers the 1961–1971 Dodge W100 (Pickup Base and Series Base), 1961–1973 Dodge W200 (Pickup Base and Series Base), 1967 Dodge W300 (Series Base), 1984–1985 Toyota 4Runner (DLX and SR5), and 1984–1985 Toyota Pickup (Base, DLX and SR5).
The list does not include Dodge Ram pickups or any Toyota years outside 1984–1985. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a 4 in. lift rear shock for older trucks and utility vehicles, measure the existing mounts and shock length before installation.
What’s included
One rear shock absorber with a protective boot. Check the package contents against your installation before starting, including the mounting hardware.














