Overview
The Rancho RS55008 is a front twin tube RS5000X shock for 1994 through 2001 Dodge Ram 1500 trucks. It suits 2 to 3 inches of lift and is built for dual front shock systems on Rams.
The shock measures 13.76 inches compressed and 22.04 inches extended, with 8.28 inches of travel. Its body is an enlarged 2-1/4-inch twin tube with eyelet mounts at both ends, and it uses a 16 mm nitro-carburized rod and a 1-3/8-inch sintered iron piston.
Confirm Ram 2500 front use and Isuzu Amigo and Pickup rear use against your vehicle before ordering.
Key features
- Twin tube body with eyelet mounts top and bottom
- Progressive engagement valving
- Tuned compression control valve
- Gas pressurized body
- Full-displaced 35 mm bore
- Rebound bumper and black natural rubber bushings
- Double-welded loops and protective boot
Dual front shock setups
Front shocks on a solid-axle truck control the wheel motion that steering makes, so they help keep the truck tracking straight. When a truck runs dual front shocks, each side has to do its share, and a shock that has lost damping can make the steering feel light or wandering at speed.
Lift changes the geometry the shocks work in. A shock sized for one lift range may not sit correctly at another, so match the shock to the lift on your truck before buying. Check the count of front units your setup requires, and confirm whether your truck has a single or dual arrangement before ordering.
When one front shock is replaced, check the other side at the same time. Inspect the mounts, bushings and tie rod ends as well, because worn joints can make a new shock feel loose or noisy.
- Count the front shocks your setup needs
- Match the shock to your lift range
- Inspect tie rod ends and ball joints with the shocks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS55008 |
| Series | RS5000X |
| Position | Front |
| Shock type | Twin tube |
| Compressed length | 13.76 inches |
| Extended length | 22.04 inches |
| Travel | 8.28 inches |
| Body diameter | 2.25 inches |
| Lift | 2 to 3 inches |
| Mounts | Eyelet, top and bottom |
Vehicle fitment
It is a direct fit for the 1994 through 2001 Dodge Ram 1500 in the Base, LT, Laramie, SS/T, ST, Sport and WS versions.
It fits Ram 1500 models from 1994 through 2001. Confirm your vehicle’s year, model and trim before ordering, including any Ram 2500 front or Isuzu rear use.
Because the kit is built for dual front shock systems on Rams, confirm whether your truck uses one or two front shocks before ordering. The 2 to 3 inch lift range should be matched to your front suspension before purchase.
What’s included
The shock comes with its protective boot. Dual front systems may need more than one shock, so check the number of units your setup requires.










