Overview
The Rancho RS999017 is a front shock absorber from the RS9000XL Series. It fits the 1978–1979 Ford Bronco and 1978–1979 Ford F-150, the 1979–1985 Toyota Pickup and the 1984–1985 Toyota 4Runner. It is gas charged with nine-position tuning, an 18mm chrome rod and a 2.75-in. (70mm) body, and it is built for trucks with a 2 to 4 in. lift.
Rancho’s lift note reads 2 – 4 in. Lift, Outer At Lower Mounting, which points to the outer lower mount position for this shock. The unit has a liquid metallic finish, red urethane bushings and a direct fit designation.
Key features
- Nine-position manual and remote tuning.
- Gas charged body with a nitrogen fill.
- 18mm chrome rod diameter.
- 2.75-in. (70mm) body diameter.
- Liquid metallic finish.
- Red urethane bushings.
- Protective boot included.
Mount position and setup
Mounting position changes the angle and travel of a shock, which is why the lower mount location matters on a lifted truck. A shock set in the wrong hole can bind at full compression or sit too short at ride height. Before fitting, mark the mount points and confirm the shock moves freely through its range without contacting the frame.
The reservoir and body should clear the frame and any exhaust tubing during setup. Check that the bushings sit square in the mount, and recheck the hardware after the first few drives. Older trucks often have brackets that need cleaning, so wire brush the mounting surfaces before reinstalling.
- Confirm the lower mount position before fitting
- Check clearance to the frame and exhaust
- Recheck hardware after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999017 |
| UPC | 10039703090176 |
| Shock series | RS9000XL Series |
| Position | Front |
| Lift | 2 to 4 in. |
| Mounting note | Outer at lower mounting |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Gas charged |
| Finish | Liquid metallic |
| Bushings | Red urethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1978–1979 Ford Bronco in the Custom, Northland and Ranger XLT trims, the 1978–1979 Ford F-150 in the Base, Custom, Northland, Ranger, Ranger Lariat and Ranger XLT trims, the 1984–1985 Toyota 4Runner in the DLX and SR5 trims, and the 1979–1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 trims.
Bronco and F-150 years outside 1978 to 1979 and Toyota years outside those listed are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift note specifies outer lower mounting, confirm the lower mount position on your truck before fitting. Keep the reservoir and body clear of the frame and any exhaust tubing during setup.
What’s included
Includes the shock absorber with its protective boot and red urethane bushings.
Not included: Confirm the lower and upper mounting hardware your installation needs before starting.














