Overview
The Rancho RS5367 is a rear gas-charged shock absorber from the RS5000 Series, part number RS5367, built for light trucks and sport utility vehicles used on and off road. Rancho’s manufacturer fitment list places it on the 2009–2010 Dodge Ram 1500 and the 2011–2018 Ram 1500.
The RS5367 is designed for both stock and raised vehicles and carries a 0 in. lift/drop rating. It has a gas charge, ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston. Rancho has built RS5000 shocks for light trucks and sport utility vehicles since 1985, and its limited lifetime warranty covers this unit. A shock absorber controls how quickly the spring compresses and rebounds, which is why the valving and piston details matter.
Key features
- Ten-stage velocity sensitive valving that responds to how fast the suspension moves
- 5/8-in. (16mm) piston rod
- 1 3/8-in. (35mm) piston
- Gas charged construction
- Rear position with a direct-fit listing
- Engineered for both stock and raised vehicles
- Red protective boot included
- Covered by Rancho’s limited lifetime warranty
Ride quality and damping
Ram 1500 trucks carry a lot of weight in the bed and cab, and the rear shocks work hard when the load shifts. The gas-charged design resists fade during repeated compression, which helps the truck keep a steady ride on highways and over broken pavement. Velocity sensitive valving reacts more firmly to fast movement and softer to slow movement.
When replacing rear shocks, check the upper and lower mounting points for wear and make sure the old hardware is not reused if it is bent or corroded. Shocks on a truck that carries heavy loads or tows should be inspected more often than those on a daily driver.
- Check upper and lower mounts for wear
- Inspect bump stops and bushings
- Replace rear shocks in pairs
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5367 |
| UPC | 39703001021 |
| Series | RS5000 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Shock type | Gas charged |
| Valving | Ten-stage, velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Warranty | Limited lifetime, Rancho |
Vehicle fitment
It fits these vehicles.
2009–2010 Dodge Ram 1500 (Laramie, SLT, ST, Sport)
2011–2018 Ram 1500 (Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman, Tradesman HD)
The list does not include other Ram 1500 model years or other Ram models such as the 2500 or 3500 series. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock comes with a red protective boot. Check the package contents against your installation, including mounting hardware, before starting.









