Select your vehicle
-13%

Rancho RS9000XL Series Shock Absorber – RS999226

Rancho

Shop Toyota Tacoma Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1995–2004 Toyota Tacoma (Base, Limited, Pre Runner, S-Runner, SR5) and 1958–1974 Land Rover (Base)
  • Rear left position, direct fit, rated w/0 in. Lift/Drop
  • 2.75-in. (70mm) body with 18mm chrome piston rod
  • 9-position manual/remote tuning through the myRide system
  • Nitrogen gas charged with liquid metallic finish
  • Protective boot included

Description

Overview

The Rancho RS999226 is a rear left RS9000XL Series shock absorber that fits the 1995–2004 Toyota Tacoma and 1958–1974 Land Rover (Base). It is a gas-charged shock with a 2.75-in. (70mm) body, an 18mm chrome piston rod and 9-position manual or remote tuning through the myRide system.

It is a direct-fit unit with a w/0 in. Lift/Drop rating, so it carries no lift or drop. Red urethane bushings and a liquid metallic finish complete the visible build of this left rear position.

Key features

  • 9-position manual/remote tuning through the myRide system
  • 18mm chrome piston rod
  • 2.75-in. (70mm) body diameter
  • Nitrogen gas charged
  • Liquid metallic finish
  • Red urethane bushings
  • Protective boot included
  • Limited Lifetime Warranty with a 90-Day Free Ride Offer

Left rear replacement steps

A left rear shock often wears faster than the right on trucks that carry a load on one side or that are driven on uneven trails. Before removing the old unit, compare the two rear shocks for oil, bushing wear and changes in how each one feels when the axle is pushed by hand. Matching the position label to the left rear side prevents a costly mistake.

Work through the mounts carefully, and clean the threads before installing the new shock. Check the upper and lower bushings for cracks and replace any that are worn. Once the truck is back on the ground, drive a short loop and recheck the bolts, since the rear end can settle after the first few miles.

Specifications

Brand Rancho
Part number RS999226
UPC 10039703092262
Shock series RS9000XL
Position Rear left
Body diameter 2.75 in. (70mm)
Piston rod 18mm chrome
Tuning 9-position manual/remote (myRide)
Charge Nitrogen gas charged
Lift/drop rating w/0 in. Lift/Drop
Fitment type Direct fit
Warranty Limited Lifetime Warranty

Vehicle fitment

It fits the 1995–2004 Toyota Tacoma in the Base, Limited, Pre Runner, S-Runner and SR5 trims, and the 1958–1974 Land Rover in the Base trim.

Tacoma years after 2004 and other Land Rover models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A protective boot is included. Confirm the mounting hardware you need before starting the installation.

SKU: RANRS999226 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Land Rover Land Rover1958–1974Base
Toyota Tacoma1995–2004Base, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rancho RS999226 fit a 1995–2004 Toyota Tacoma?

Yes. The manufacturer fitment list includes the 1995–2004 Toyota Tacoma in the Base, Limited, Pre Runner, S-Runner and SR5 trims. Check your year and trim against that list to confirm the match.

Is RS999226 a front or rear shock?

It is a rear left shock, as shown by its position rating. Use the position label to confirm the left rear side before you install it, and match the part to your vehicle's listed trim.

Does this shock have a lift rating?

No lift or drop. The RS999226 carries a w/0 in. Lift/Drop rating and is direct fit. It is gas charged, with a 2.75-in. body and an 18mm chrome piston rod.

What are the part number and UPC for RS999226?

The part number is RS999226 and the UPC is 10039703092262. The brand is Rancho and the shock series is RS9000XL, with 9-position manual or remote tuning.

Should the right rear shock be replaced along with the left?

Usually replace them as a pair. Shocks that match in damping keep the rear end level and the truck tracking straight. If one side is worn, inspect the other for leaks and bushing wear before deciding.

How do I tell whether a rear shock is worn?

Look for fluid on the body, a rear end that keeps bouncing after bumps and uneven rear tire wear. A shock that feels soft or stiff compared with the other side often needs replacing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Shock Absorbers on Amazon