Overview
The Rancho RS5014 is an RS5000 Series shock absorber for light trucks and sport utility vehicles, suited to both stock and lifted applications. The RS5000 line is intended as a workhorse shock for on-road and off-road driving, and the series has been offered since 1985.
Shock absorbers control how quickly the suspension compresses and rebounds over bumps and ruts. This RS5014 uses ten-stage velocity sensitive valving, and Rancho lists its shock type as hydraulic / gas charged. No specific vehicle is named for the RS5014, so confirm fitment before installing.
Key features
- Ten-stage velocity sensitive valving
- Designed for both stock and raised vehicles
- Red protective boot included
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Covered by Rancho’s limited lifetime warranty
Using a workhorse shock
Light trucks and sport utility vehicles place varied loads on the rear and front axles, from daily commuting to towing and trail work. A shock with ten-stage velocity sensitive valving responds differently to slow suspension movement and fast impacts, which helps control body motion over both smooth and rough surfaces. Matching the shock to how the vehicle is used matters more than chasing a single setting.
When the vehicle is lifted, the shock’s travel and angle change, so check that the upper and lower mounts still clear the frame and suspension parts. Replacing shocks in pairs on the same axle keeps damping balanced. Inspect the protective boot regularly, since dirt and grit on the rod can wear seals and reduce damping over time.
- Check the boot for tears
- Look for fluid on the shock body
- Inspect the mounting bushings for cracks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5014 |
| UPC | 10039703501405 |
| Series | RS5000 Series |
| Shock type | Hydraulic / gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Protective boot | Red, included |
| Quantity | Each |
Vehicle fitment
This part number is not tied to a specific year, model or chassis. Verify year, model and chassis against your vehicle before ordering.
The shock suits light trucks and sport utility vehicles in general, for stock and lifted setups. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Each listing is a single shock absorber with the red protective boot included.









