Overview
The Rancho RS8128 is a leaf spring center bolt kit with two 3/8 inch diameter bolts, each 5 inches long. Two matching 3/8 inch nuts are included. Rancho gives it a universal fit label, so no vehicle is named and the bolt size should be matched to your leaf spring.
Center bolt basics
A center bolt passes through the middle of a leaf spring pack and holds the leaves together at the axle seat. It carries side loads and keeps the pack from shifting, so a bent or loose bolt can cause the leaves to walk out of position. The bolt’s diameter and length need to suit the hole and the spring pack, which is why matching the hole first matters.
When the spring is apart, inspect the center hole for elongation and the bolt for bending or thread damage. Use new nuts when reinstalling, and tighten evenly so the pack seats flat. Recheck the nuts after the first drive, since new hardware can settle as the spring takes load.
- Inspect the center hole for elongation
- Replace bolts that show bends or thread wear
- Use new nuts on reinstallation
- Confirm the pack sits flat before tightening
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS8128 |
| UPC | 39703812801 |
| Bolt diameter | 3/8 inch |
| Bolt length | 5 inches |
| Quantity | Two bolts and two nuts |
| Fitment | Universal fit |
Vehicle fitment
The kit is universal fit and is not tied to a specific leaf spring or axle. Check your spring’s center pin hole against the 3/8 inch bolt size before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two 3/8 inch diameter by 5 inch leaf spring center pin bolts and two 3/8 inch nuts.







