Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999256

Rancho

Shop Jeep Wrangler TJ Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shock for 1997-2006 Jeep Wrangler TJ and 2004-2006 Wrangler LJ
  • Part number RS999256, Rancho RS9000XL Series
  • Listed lift range 2 inch to 4 inch
  • 18mm piston rod, nitrogen gas charged
  • 9-position manual/remote tuning, protective boot included

Description

Overview

The Rancho RS999256 is a rear RS9000XL Series shock absorber that fits the 2004-2006 Jeep Wrangler (LJ) and 1997-2006 Jeep Wrangler (TJ), in the trims named below. It is built for Wrangler TJ and LJ models, not the JK generation.

The shock is rated for a 2 inch to 4 inch lift range and carries a w/3 in. Lift rating. It uses an 18mm piston rod, a nitrogen gas charge and 9-position manual or remote tuning, with a protective boot included.

Key features

  • 18mm piston rod
  • Nitrogen gas charged
  • 9-position manual/remote tuning
  • Protective boot included
  • Listed lift range of 2 inch to 4 inch

Wrangler TJ and LJ rear work

Rear shock work on a Wrangler often goes hand in hand with checking the rest of the rear suspension. Lift, tire size and load all change how the shock travels, so the rear can feel firm, soft or bouncy depending on the setup. Matching the damping to the actual height of the truck gives a more predictable ride on both pavement and trails.

Front and rear dampers are often serviced together on a Wrangler, since a mismatch can make the truck feel unsettled. Inspect the track bar, bump stops and steering components at the same time. Small changes to the setting are easiest to judge when you drive the same route after each adjustment.

  • Check bump stops and their mounts
  • Inspect the track bar and its bushings
  • Recheck lift height after changing tire size

Specifications

Brand Rancho
Part number RS999256
Shock series RS9000XL Series
Position Rear
Rod 18mm piston rod
Charge Nitrogen gas
Tuning 9-position manual/remote
Lift height 2 inch to 4 inch (w/3 in. Lift)
Included Protective boot

Vehicle fitment

The 2004-2006 Jeep Wrangler (LJ) fits in Unlimited and Unlimited Rubicon trims, and the 1997-2006 Jeep Wrangler (TJ) fits in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.

Wrangler JK (2007-2018) and JL models are not on this list, and neither are Grand Cherokee or Cherokee models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The listed range is 2 inch to 4 inch of lift, so confirm your suspension’s lift falls within it before choosing this rear shock.

What’s included

The contents are a single rear shock fitted with its protective boot.

SKU: RANRS999256 Category:

Specification

Shipping weight 6.50 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS999256 fit a Jeep TJ?

Yes. It fits the 1997-2006 Jeep Wrangler TJ in several trims, including Rubicon, Sahara, Sport and X. Confirm your year and trim before ordering, since only the trims named here are covered.

Does this shock fit a JK Wrangler?

No. It fits the 1997-2006 TJ and 2004-2006 LJ Wrangler only, so 2007-2018 JK models are not covered. Check your model year before choosing this shock, and confirm the trim as well.

What lift height is the RS999256 for?

The shock is rated for a 2 inch to 4 inch lift range, and its lift rating reads w/3 in. Lift. Compare these figures with the lift on your Wrangler before fitting, and confirm your rear suspension height.

Should the rear shock be serviced with the front shocks?

It is common to service front and rear dampers together on a Wrangler, since mismatched damping can make the truck feel unstable. Check the front shocks, track bar and steering components at the same time. Use settings that suit the whole truck rather than one end alone.

How do I know when this rear shock needs replacing?

Look for oil seepage on the body, a rod that feels rough when pushed by hand, and bouncing after dips. Uneven rear tire wear and a sagging rear end can also point to a worn unit. Inspect both rear shocks together.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Shock Absorbers on Amazon