Overview
The FTS1103 is a polyurethane control arm bushing kit in black, sold under part number FTS1103. It carries a universal fit label, so no specific vehicle years, makes, models or trims are tied to it.
The bushings help control wheel hop, improve cornering control and hold proper caster and camber.
Key features
- Black polyurethane bushings
- Helps control wheel hop
- Improves cornering control
- Helps hold proper caster and camber
- Universal fit
Checks after installation
After new control arm bushings go in, the suspension needs a short settling period. Drive gently for the first few trips and listen for new noises, which can come from a bushing that sits off-square. Recheck the fasteners once the vehicle is back on the ground.
Handling changes after a bushing replacement are usually subtle. Drivers often notice tighter steering and less wander at speed, while the ride may feel firmer. Keep a record of the mileage and the date so you can track wear on the new parts over time.
If the vehicle pulls to one side or the tires wear unevenly after the work, have the alignment checked. Persistent noise or a loose feel points back to the joints, the mounts or the arm itself, so inspect those before assuming the new parts are at fault.
- Retorque fasteners after the first drives
- Listen for new clicks or squeaks
- Note any change in steering feel
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1103 |
| UPC | 674866002234 |
| Color | Black |
| Type | Polyurethane |
| Fitment | Universal Fit |
Vehicle fitment
The kit has a universal fit label with no specific year, make, model or trim attached.
Universal kits are not vehicle specific, so verify that the bushing matches your control arm’s design before installing. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the pieces against your installation plan when the kit arrives.








