Overview
This front reservoir shock uses a smooth body and CD adjuster, and it fits 2014–2018 Ram 2500 and 2013–2018 Ram 3500 trucks. It is a direct fit design for the front position.
The shock is built to support suspension travel on and off road and is rated for a w/0 – 1.5 in. lift range. Compare the shock’s dimensions with the original before installing.
Key features
- Front position, direct fit
- CD adjuster on a smooth body reservoir
- Lift range w/0 – 1.5 in.
- Fox 2.0 Factory Series design
Front reservoir shock upkeep
A reservoir shock places its gas and oil in a separate canister, which gives the shock room for heat and oil movement during long runs. Keep the reservoir and hoses clean, since dirt on the seals can speed wear. Check the hose routing so it does not rub against the frame or steering components.
A CD adjuster lets owners change damping from the cabin or the shock body, so a setting can suit street use or rough off-road work. Record the setting after installation so you can return to it. After trail work, recheck the mounts and bushings, because a reservoir shock with loose hardware will feel inconsistent.
- Keep reservoir hoses clear of the frame
- Wipe dirt from seals after dusty trips
- Record the adjuster setting after install
- Inspect mounts after heavy trail use
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-26-098 |
| UPC | 700007190545 |
| Position | Front |
| Fitment type | Direct Fit |
| Lift height | w/0 – 1.5 in. Lift |
| Adjuster | CD adjuster |
Vehicle fitment
It fits 2014–2018 Ram 2500 trucks in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims. It fits 2013–2018 Ram 3500 trucks in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Ram 1500 models and Ram 2500 trucks before 2014 are absent from this coverage. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the box contents, including any bushings and hardware, before starting the install.









