Overview
The Icon Suspension 57625P is a rear shock set for the Toyota Land Cruiser 200 series, built for 0 to 2 inch of lift. It fits Base models from 2008 to 2011 and 2013 to 2017, and the 2012 model year falls outside that fit.
It is a vehicle specific 2.5 Series shock, configured in length and damping tune for this application. A one piece linear/digressive piston and its valving are matched to the vehicle. The set is built for strong off road performance with a smooth street ride, and it is 100% rebuildable and 100% revalveable, so the damping can be serviced or retuned later.
Key features
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston with vehicle specific valving
- Premium grade 5WT shock oil for consistent damping across a wide temperature range
- 5/8 inch chrome plated hardened steel shaft that resists corrosion and pitting
- Polyurethane bushings, zinc plated sleeves and forged steel mounting stems
- 6063 anodized aluminum body and reservoir tubing
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable and 100% revalveable
Setting up a shock set
Shocks sold as a set should be treated as one unit. Matching damping from side to side keeps the body level under braking and cornering, and it keeps the rear tires working evenly. Before work starts, measure the current lift on both sides, since uneven lift can make one shock work harder than the other.
Mounts and bushings on a Land Cruiser 200 series take heavy loads, so inspect them during the install. Look for cracked polyurethane, loose stems and corrosion around the mounting points. Keep the new set’s mounting hardware together and check it again after the first drive.
- Measure lift on both sides before installing
- Inspect polyurethane bushings for cracks
- Check mounting stems for looseness after the first drive
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57625P |
| UPC | 700007270671 |
| Position | Rear |
| Sold as | Set |
| Lift height | 0 to 2 inch |
| Design | Nitrogen charged monotube with internal reservoir |
| Piston | One piece linear/digressive |
| Shaft | 5/8 inch chrome plated hardened steel |
| Rod end and top cap | 6061 aluminum |
| Body and reservoir tubing | 6063 anodized aluminum |
| Mounting stems | Forged steel |
| Shock oil | Premium grade 5WT |
| Top out bumper | Nitrile rubber |
| Rebuildable | 100% |
| Revalvable | 100% |
Vehicle fitment
It fits Base trim Toyota Land Cruisers from 2008 to 2011 and 2013 to 2017.
The 2012 model year and other Land Cruiser generations are not covered. Before ordering, check your year and trim against these Base entries.
Installation notes
The forged steel mounting stems are designed for OE factory type fitment, so match them to the factory mounts on your vehicle before tightening. Support the vehicle securely before removing any rear shock.
What’s included
The shocks are sold as a set. Check the package contents against your installation before starting.