Overview
The Pro Comp Suspension 227010 is a single steering stabilizer kit for the 2005–2007 Ford F-250 Super Duty and 2005–2007 Ford F-350 Super Duty. It includes one ES2000 stabilizer shock with its bracketry. The kit works with the truck’s own steering frame brackets, which must be in place for the shock to mount.
The ES2000 is built to improve steering handling, reduce wheel vibration and lessen bump steer, the unwanted steering movement that bumps and oversized tires can cause on Super Duty trucks.
Key features
- Single ES2000 stabilizer shock
- Bracketry included with the shock
- Designed for the stock frame brackets on 2005–2007 Super Duty trucks
- Direct fit for the Harley-Davidson, King Ranch, Lariat, XL and XLT trims
Frame brackets and mounting
On a stabilizer that relies on existing frame brackets, the condition of those brackets matters as much as the shock itself. Frame mounts can crack around welds or loosen over time, especially on trucks that tow or see rough roads. A shock bolted to a weakened bracket will not control the steering as intended, so the brackets deserve a close look before any new part is fitted.
When the shock is installed, make sure the bolts are torqued to the vehicle’s own specification and that the shock can move through its full travel without touching the frame or linkage. Check the mounts again after the first few hundred miles of use, since fasteners can settle under heavy loads.
- Look for cracks around frame bracket welds
- Clean mating surfaces before bolting
- Recheck fasteners after initial miles
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 227010 |
| UPC | 614901109528 |
| Type | Single steering stabilizer |
| Series | ES2000 |
| Brackets | Included |
| Stock frame brackets | Required |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty and the 2005–2007 Ford F-350 Super Duty, in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The 1999–2004 and 2008 and later Super Duty trucks are not in this list, and the 1999–2004 stabilizer 222570 is a different application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock frame brackets must be present and in good condition, because the kit does not replace them. Check them for cracks or wear before installing the shock.
What’s included
One ES2000 stabilizer shock and the bracketry supplied with it.
Not included: the stock frame brackets, which must already be on the truck, and the shock boot.






















