Overview
The Pro Comp traction bar mounting kit (part number 75006B) holds Pro Comp traction bars in place on the 2005 to 2010 Dodge Ram 1500. Traction bars are used to reduce axle wrap on a lifted truck, and this kit is the mounting hardware that positions them. It bolts on, is finished in black, and is sold as a pair.
Bushings and sleeves for the install are included. It fits the 2005 to 2010 Dodge Ram 1500 in several trims, including the Laramie, SLT, ST, SXT, Sport and TRX4 models.
Key features
- Mounting kit for Pro Comp traction bars on the Dodge Ram 1500
- Includes bushings and sleeves
- Bolt-on installation
- Black finish
- Sold as a pair
Matching the brackets to the bars
Traction bar brackets and bars work as a matched pair, so bar ends, bracket holes and bushing sizes must line up before the truck is driven. A test fit on level ground is the easiest way to confirm alignment. Check that each bar pivots freely through its full range before tightening anything, and look for any contact with the steering, brake lines or exhaust.
Inspect the old mounting points for rust or cracks, because the brackets carry load on every acceleration and braking event. Plan to recheck every fastener after the first drives, and again after any hard trail use. Keep spare bushings on hand if the truck sees frequent off-road work, since worn bushings let the axle move beyond what the bars are meant to control.
- Test fit on level ground before final tightening
- Check for contact with steering and brake lines
- Keep spare bushings for frequent off-road use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 75006B |
| UPC | 614901114683 |
| Type | Traction bar mounting kit |
| Included | Bushings and sleeves |
| Quantity | Pair |
| Finish | Black |
Vehicle fitment
It fits the 2005 to 2010 Dodge Ram 1500, including the Laramie, SLT, ST, SXT, Sport and TRX4 models.
The Ram 2500 and 3500 and the 2011 and later Ram 1500 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts on with the bushings and sleeves it includes. It is made to match the traction bars, so check the bar and kit numbers against each other before buying.
What’s included
Black Ram 1500 mounting brackets with bushings and sleeves, sold as a pair.








