Overview
The FUEL Off-Road 20×10 Coupler wheel, part number MHTD55620001745, is a 20-inch aluminum spoke wheel in black machined finish, 10 inches wide. It is listed with one bolt pattern, 8 on 170, which is the number to check first against a vehicle’s hub.
The range covers many bolt pattern and offset mixes. This 20×10 version uses a -24 offset with 4.5 backspacing and a 125 center bore, so the stud pattern, bore and offset are the measurements to check against your hub.
Key features
- 20 by 10 inch aluminum spoke wheel
- Black machined finish
- Single 8 on 170 bolt pattern
- Offset of -24
- Backspacing of 4.5
- Center bore of 125
Choosing the right setup
Eight-lug wheels are used on several truck and SUV hubs, but the stud spacing and hub bore are not interchangeable. A wheel with a 170 pattern and a 125 center bore needs a hub that matches both, or a ring that closes the bore gap. Negative offset moves the wheel outward, which changes clearance to brakes, suspension parts and fender edges. Tire size matters too, because a larger diameter changes rolling height and rubbing risk.
Before the install, inspect the studs for damage and check the lug seat style against the nuts you plan to use. Clean the hub face and remove any rust or paint buildup so the wheel sits flat. After the first few drives, check the lug torque and look at the wheel for movement or cracking near the spokes.
- Compare the stud count and spacing first
- Check the center bore against the hub diameter
- Measure clearance at the calipers and fenders
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD55620001745 |
| Model | Coupler |
| Wheel diameter | 20 Inches |
| Wheel width | 10 Inches |
| Style | Spoke |
| Finish | Black Machined |
| Construction | Aluminum |
| Bolt pattern | 8 on 170 |
| Offset | -24 |
| Backspacing | 4.5 |
| Center bore | 125 |
Vehicle fitment
No vehicle fitment is listed. The fitment tag reads universal fit, with no year, make, model or trim, so the 8 on 170 pattern and 125 center bore need to be confirmed on the vehicle itself.
Confirm your vehicle’s bolt pattern, center bore and offset before ordering.
Installation notes
The 125 center bore may need a hub-centric ring on some hubs. A -24 offset changes where the wheel sits relative to the hub, so check clearance to the calipers, suspension and fenders before mounting.
What’s included
This covers a single wheel. Lug nuts and center caps are not part of it, so buy any missing hardware before you begin the install.









