Overview
The Pro Comp Rear Add-A-Leaf, sold as a pair (part number 13120), is a short leaf added to the rear leaf spring pack to raise the rear by 1.5 to 2.5 inches. It is a direct fit for the rear position and is used when that much added height is needed.
An add-a-leaf also strengthens the existing spring pack, which helps when a spring needs renewing because of age or heavy loads. It works as both a lift and support for a tired spring. The kit includes an extended center bolt for the pack.
The add-a-leaf fits trucks, SUVs and Jeeps from 1966 through 2002. Fitment covers the Chevrolet Blazer, Chevrolet S10 and S10 Blazer, Ford Ranger and Explorer, Dodge Ram 1500, GMC Sonoma and Jimmy, Jeep Cherokee XJ, Jeep CJ5 and CJ7, Nissan Pathfinder, Toyota 4Runner and several older Nissan, Toyota and Mitsubishi trucks.
Key features
- Adds 1.5 to 2.5 inches of rear raised height
- Strengthens an existing leaf spring pack
- Helps renew a spring weakened by age or heavy loads
- Short leaf length, sold as a pair
- Extended center bolt included
Spring wear and sag
Leaf springs lose arch over years of loading, and the rear often sags first. An add-a-leaf adds a short leaf to the pack, which restores some height and stiffens the spring. Because the added leaf changes how the pack flexes, it affects how the rear carries weight and how the shocks are loaded.
Adding a leaf is not always the only option. Worn bushings, a cracked spring eye or a broken leaf need attention before or alongside any added leaf. Check the shackles and bump stops, and make sure the brake lines and driveline have room at the new height.
- Inspect the spring eyes and shackles
- Check bump stop clearance
- Look at brake line routing
- Recheck driveline angle after fitting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13120 |
| UPC | 61490114006 |
| Position | Rear |
| Lift height | 1.5 to 2.5 inches |
| Leaf length | Short |
| Type | Short add-a-leaf |
| Sold as | Pair |
| Included | Extended center bolt |
| Fit type | Direct fit |
Vehicle fitment
It fits the Chevrolet Blazer (1995–1998), Chevrolet S10 (1982–2000), Chevrolet S10 Blazer (1983–1994), Ford Ranger (1983–1997 and 1999–2002), Ford Explorer (1991–1997), Dodge Ram 1500 (1994–1998), GMC Sonoma (1991–2000), GMC Jimmy (1992–1998), Jeep Cherokee XJ (1989–2001), Jeep CJ5 (1976–1983), Jeep CJ7 (1976–1986), Nissan Pathfinder (1987–1997), Toyota 4Runner (1984–1998) and older trucks from Toyota, Nissan and Mitsubishi.
The Jeep Wrangler is not on the list, and neither are model years outside the ranges above, such as 2003 and later Ford Ranger models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the pair to both rear springs so the rear sits level. Check ride height and driveline angle after installation, since an added leaf changes both.
What’s included
A pair of short add-a-leaf units with an extended center bolt.








