Overview
The Rubicon Express RE1415 is an Add-A-Leaf rear spring kit with a 2-inch half leaf, sold as a pair, for the 1984–2001 Jeep Cherokee (XJ).
The Add-A-Leaf is a lower-cost way to lift the rear of an XJ, and it is designed to limit axle wrap. The factory spring clamps stay on during installation.
Key features
- 2-inch half leaf design
- Sold as a pair
- Rear position
- Factory spring clamps stay in place during installation
- Short type
Rear lift and axle wrap
Adding height at the rear changes how the axle sits under the frame, and that is where axle wrap and driveline angle come into play. A short leaf adds lift without moving the spring eye, which keeps rear geometry close to stock. Check the brake lines and the parking brake cable after the change, since a higher axle can pull them tight.
Tires, wheels and clearance also need a fresh look after a rear lift. Rear fenders, the spare tire carrier and bumper clearance should be checked once the new height settles. Retorque the U-bolts after the first few drives and again after a short run on rough roads, because clamp hardware can settle as the leaf seats.
- Check shock length after the lift
- Inspect brake lines for stretch
- Recheck driveline angle after installation
- Retorque U-bolts after the first drive
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1415 |
| UPC | 614901438215 |
| Position | Rear |
| Leaf type | 2-inch half leaf, short |
| Sold as | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) for rear suspension only.
Match your Cherokee’s year and trim to the fit before ordering, especially for other Cherokee generations or the Grand Cherokee.
Installation notes
The factory spring clamps do not need to be removed for installation, so the leaf goes in with the clamps left on the spring.
What’s included
A pair of 2-inch half leaves, sold as a pair.







