Overview
The Fabtech FTS200 is a rear add-a-leaf kit with 1.5 inch lift height, sold as a pair in black. It is designed for 1984–1995 Toyota Pickup and 1995–2004 Toyota Tacoma models.
Fabtech says many add-a-leaf kits are stiff and hard to install. Its thin leaf technology is meant to address both points, giving a smoother ride with simpler installation.
Key features
- Thin leaf technology aimed at a smoother ride
- Designed for installation Fabtech describes as effortless
- Short type add-a-leaf kit
- 1.5 inch lift height
- Sold as a pair
Short-type leaf kits
A short add-a-leaf adds a single extra leaf to the rear spring pack, raising the rear slightly and firming the spring rate under load. Because the extra leaf covers only part of the spring length, this type suits trucks that carry moderate loads and see mostly street or light trail use. Heavier towing often calls for a longer kit or a different spring setup.
Before fitting, inspect the existing leaf springs for sagging, cracked leaves and worn bushings, and check the shock absorbers and bump stops. Replacing worn U-bolts and spring hangers at the same time keeps the rear axle located correctly. After installation, recheck the torque on all clamp bolts after the first few drives, and watch the rear tire wear over the next few alignments.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS200 |
| UPC | 674866002982 |
| Position | Rear |
| Type | Short |
| Lift height | 1.5 inch |
| Color | Black |
| Quantity | Pair |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1984–1995 Toyota Pickup models in Base, DLX, SR5 and SR5 Turbo trims, and 1995–2004 Toyota Tacoma models in Base and Pre Runner trims.
Other Toyota models and years fall outside this kit’s coverage, and Tacoma trims beyond Base and Pre Runner are not covered. Confirm year, model and trim against your truck before ordering.
Installation notes
Plan on an alignment check after installation, because a leaf kit changes suspension geometry. Gather the tools your rear spring work requires before starting.
What’s included
The kit is sold as a pair. Inventory the hardware in the box before starting the install.






