Overview
The Pro Comp 13170 is a single short rear add-a-leaf kit. Pro Comp says add-a-leaf kits are the right choice when 1.5 to 2.5 inches of raised height is needed at the rear.
The leaf also strengthens the integrity of an existing leaf spring pack, so it supports the pack rather than replacing it.
Key features
- Single short rear add-a-leaf
- Raises the rear 1.5 to 2.5 inches
- Strengthens an existing leaf spring pack
- Designed for rear leaf spring suspension
Single leaf versus full pack
A single leaf adds height and support to the pack without replacing the leaves already in it. Because only one leaf is added, the effect depends heavily on how the existing pack is built and how worn it is. Check the leaves for cracks, broken clips and a sagging arch before fitting anything, since a weak pack will keep sagging even with an extra leaf.
A short leaf covers less of the spring length, so it works best where the existing pack has a clear, even arch. Measure the spring eye to eye and compare it with the leaf length before buying. Replace worn spring bushings and check the axle U-bolts after installation. Recheck the rear height after the first drives, since the leaf can settle slightly as the pack seats.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13170 |
| UPC | 614901140170 |
| Position | Rear |
| Kit type | Add-a-leaf, single |
| Length | Short |
| Raised height | 1.5 to 2.5 inches |
| Fit | Labeled universal fit |
Vehicle fitment
Confirm the leaf suits your spring pack’s width, thickness and length, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adding a leaf raises the rear, so driveline angles and alignment should be checked after installation. Plan on checking the driveline at the full 1.5 to 2.5 inch raised height.









