Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Steering Stabilizer – 226000B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-X hydraulic twin tube steering stabilizer, 26.33 inches extended
  • Fits 2000-2005 Ford Excursion and 1999-2004 Ford F-250 and F-350 Super Duty
  • 5/8-inch chrome hardened shaft and 1-3/8 inch nylon banded piston
  • Brackets and shock boot not included

Description

Overview

The Pro Comp PRO-X Twin Tube Steering Stabilizer, part number 226000B, is a black hydraulic stabilizer for the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty. It is built to improve handling and reduce wheel vibration, which can lead to suspension fatigue and failure.

A steering stabilizer reduces bump steer, the kick a steering wheel gives when the front wheels hit a bump. Oversized tires and rough roads are the usual triggers. This unit has a 2.36-inch body, a 5/8-inch chrome hardened piston rod and a Teflon rebound stop, with a 26.33-inch extended length and 10.74-inch travel length.

Key features

  • Twin tube design for steering stabilization
  • 5/8-inch chrome hardened piston rod
  • 1-3/8 inch nylon banded piston
  • Teflon rebound stop for a comfortable highway ride
  • Black powder coat finish
  • Loop mounts at both ends

Choosing a bracket setup

A steering stabilizer only works as well as the brackets holding it. The loop ends need solid mounting points on the axle and on the frame or steering linkage, and the position of those points decides how the unit loads when the wheels turn. Before buying a bracket kit, measure the existing mounting points and the stabilizer’s collapsed and extended lengths so the brackets set the unit at the right working length.

Brackets built for a heavy-duty truck should be checked for weld quality and hardware grade. Replace any worn bushings or sleeves in the loop ends at the same time, since a stiff or sloppy end changes how the damper responds. After installation, turn the steering lock to lock and watch for binding or contact with the tie rod.

  • Measure mounting points before buying brackets
  • Replace worn loop-end bushings with the stabilizer
  • Check for contact with the tie rod at full lock

Specifications

Brand Pro Comp Suspension
Part number 226000B
Series PRO-X
Type Stabilizer only, hydraulic
Extended length 26.33 inches
Collapsed length 15.59 inches
Travel length 10.74 inches
Body diameter 2.36 inches
Upper mount Loop
Lower mount Loop
Piston 1-3/8 inch nylon banded
Shaft 5/8-inch chrome hardened
Finish Black powder coat

Vehicle fitment

It fits the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty trucks.

The fitment data does not include the Ford F-150, the Ford Ranger, or Super Duty trucks from 2005 on. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the bracket setup for your truck, whether single or dual, before installing.

What’s included

One steering stabilizer.

Not included: mounting brackets, and the optional shock boot, which is sold separately.

Fitment

VehicleYearsTrims
Ford Excursion2000–2005Eddie Bauer, Limited, XLS, XLT
Ford F-250 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this stabilizer fit a 2007 Ford F-250?

No. The fitment data covers the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty and the 2000–2005 Ford Excursion, so 2007 Super Duty trucks are not covered. Check the year and model of your truck against those entries.

Does the PRO-X 226000B come with brackets?

No. The stabilizer comes without brackets, and the shock boot is an optional extra sold separately. Get brackets that suit your truck before installing the stabilizer.

What are the extended and collapsed lengths?

The extended length is 26.33 inches and the collapsed length is 15.59 inches, which gives a travel length of 10.74 inches. The body is 2.36 inches in diameter, and the piston rod is 5/8-inch chrome hardened.

How often should a steering stabilizer be inspected?

Check it at tire rotations and alignments, and sooner after hard off-road use. Look for leaking fluid, cracked or loose loop mounts, and play at the ends. Address wear promptly, since a weak stabilizer leaves the steering less controlled.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon