Overview
The Pro Comp PRO-X twin tube steering stabilizer, part number 222560B, is a single hydraulic steering stabilizer for the 2000–2005 Ford Excursion, F-250 Super Duty and F-350 Super Duty. Pro Comp designs it to damp steering movement and reduce bump steer caused by oversized tires or rough roads. Pro Comp adds that the damping also helps reduce wheel vibration, which can fatigue suspension components over time.
The stabilizer has a 2.0 inch twin tube body, a 1-3/8 inch nylon banded piston and a 5/8 inch chrome hardened piston rod. Pro Comp says its Teflon rebound stop gives a comfortable highway ride while still handling demanding driving. Both ends use loop mounts, and the unit is sold individually rather than as a pair.
Key features
- Twin tube hydraulic design with a 2.0 inch body
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop for highway comfort
- Extended length of 23.92 inches with 9.25 inches of travel
- Loop mounts at both ends and a black powder coat finish
Why heavy trucks need damping
Full-size trucks carry more weight on the front axle, and larger tires add leverage to every bump the wheels meet. A steering stabilizer absorbs part of that energy before it reaches the steering wheel, which is why bump steer tends to show up on these trucks first. The damping also helps protect the drag link and tie rods from repeated shock loads.
Stabilizer wear is easy to misread as a steering box or ball joint problem. Before replacing the unit, check the drag link, tie rod ends and pitman arm for play, and look at the front tires for uneven wear that could be pulling the wheel off line. Keep tire sizes and pressures matched side to side so the damping works evenly.
- Check tie rod ends and drag link for play
- Match tire size and pressure side to side
- Inspect mounting hardware after rough-road use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222560B |
| Series | PRO-X |
| Type | Steering stabilizer, single |
| Fitment | Direct fit |
| Extended length | 23.92 in |
| Collapsed length | 14.67 in |
| Travel length | 9.25 in |
| Body diameter | 2.0 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Piston | 1-3/8 in nylon banded |
| Piston rod | 5/8 in chrome hardened |
| Finish | Black powder coat |
| Shock boot | Not included (optional, sold separately) |
| Brackets | Not included |
| Quantity | Sold individually |
Vehicle fitment
It is a direct fit for the 2000–2005 Ford Excursion, 2000–2005 Ford F-250 Super Duty and 2000–2005 Ford F-350 Super Duty.
The list covers only those three Ford models for 2000–2005, so other Ford trucks and years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so the stabilizer cannot be mounted until you have brackets that match your truck’s steering linkage.
What’s included
One PRO-X steering stabilizer, sold individually.
Not included: the mounting brackets, and the shock boot, which is optional and sold separately.









