Overview
The Rancho Steering Stabilizer Bracket, part number RS5542, is a single mount-only bracket for a steering stabilizer. It fits the 2002–2004 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims, and the 1999–2004 Ford F-250 and F-350 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The bracket comes with hardware that some Rancho steering stabilizers need to complete installation. The shock boot is not included.
Key features
- Single steering stabilizer mount
- Brackets included
- Hardware needed for some Rancho installations included
- Shock boot not included
Matching the bracket to your setup
A steering stabilizer sits across the steering linkage and damps movement that would otherwise travel into the wheel. On heavy trucks, that damping keeps the steering steadier over rough ground and when tires are larger than stock. A single mount bracket is simple to fit, but the stabilizer and bracket must work together, so the mounting ends, bushings and fasteners should be checked as a set before the bracket is bolted on.
Mount-only brackets leave the stabilizer choice to the owner, so take a moment to confirm the stabilizer model, its end fittings and its boot arrangement. Look at the frame and axle mounting points for cracks or bent tabs. Tighten fasteners in stages and recheck them after the first few drives, since steering loads settle the hardware over time.
- Confirm the stabilizer model before ordering
- Inspect frame and axle mount points
- Recheck fasteners after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5542 |
| Type | Mount only |
| Configuration | Single |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
It fits the 2002–2004 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims, and the 1999–2004 F-250 and F-350 Super Duty in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Ford models other than those listed, and years outside the ranges named, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock boot is not included, a separate boot is needed if your stabilizer requires one. Check the bracket fit against your Rancho stabilizer before installing.
What’s included
One mount-only bracket with the hardware Rancho describes. The shock boot is not included.








