Overview
The Fabtech Dirt Logic 2.25 Shock Absorber, part FTS800692, is a rear gas-charged monotube shock for lifted Toyota FJ Cruiser and Tacoma vehicles. It fits the 2007–2011 FJ Cruiser and the 2005–2013 and 2015–2017 Tacoma, in the trims shown in the Vehicle fitment section below.
The Dirt Logic line is a large-diameter monotube shock built for lifted vehicles. It mounts in the original equipment shock locations as well as in several other shock configurations.
Key features
- Monotube, gas-charged construction
- Large-diameter body in the Dirt Logic 2.25 series
- Mounts in original equipment shock locations and several alternate shock configurations
- Built with a reservoir in this FTS800692 version
- Stainless steel construction
- Rated for a 6 in. lift
- Described finishes: blue or black anodized
Lifted Toyota shock setup
On a lifted FJ Cruiser or Tacoma the rear shock works with longer suspension travel, and it helps control axle movement over ruts and rocks. A large-diameter body is meant to hold damping steady when the shock heats up on steep trails. The rear end also carries cargo and bed loads, so shock sizing matters.
When choosing, match the shock to the lift on your truck and check the mount style. Shock length at full extension and compression matters as much as the lift number, so measure the space before you order. Replacing both rears together keeps the ride level from side to side.
Look over the rear shocks after trail use. Check for oil seepage, cracked bushings and worn mounting bolts. Re-torque the hardware after the first few drives on a new install, and recheck it each time the tires are rotated.
- Measure shock length at full travel
- Check the mount style against your truck
- Inspect bushings after rough trail runs
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS800692 |
| UPC | 674866094727 |
| Product line | Dirt Logic 2.25 |
| Position | Rear |
| Shock type | Monotube, gas charged |
| Reservoir | With reservoir |
| Material | Stainless steel |
| Finish | Blue or black anodized finish |
| Lift height | w/ 6 in. lift |
| Fitment type | Direct fit |
| For use with part numbers | K7021DB, K7023DB |
Vehicle fitment
It fits the 2007–2011 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition trims.
It fits the 2005–2013 and 2015–2017 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims.
The 2014 Tacoma and Tacoma years after 2017 fall outside this fit range, and the FJ Cruiser is not covered after 2011. Other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is rated for a 6 in. lift, so compare that figure with your truck’s suspension height before ordering. It is a direct fit for the original mounting positions. An installer who can check shock length and clearance at full travel is a sound choice for a lifted vehicle.
What’s included
Check the package contents against your installation before starting, including any mounting hardware you need.








