Overview
The Pro Comp Nitro 65225K is a leveling lift kit with 3 inches of front lift and 1 inch of rear lift. The front uses strut spacers, and the rear uses lift blocks with U-bolts. The maximum tire size is 33 inches. Hardware and instructions are included.
The kit is an economical alternative to a complete suspension system and keeps the factory steering geometry intact. A wheel alignment is required after installation. Pair the kit with a front shock and a rear shock sized for the new ride height.
The front lift is made with strut spacers, which keep the factory steering geometry, and the rear is lifted with lift blocks and U-bolts. The rear lift blocks and U-bolts are a simple way to set the rear height, and the strut spacers keep the front suspension close to its factory layout.
Key features
- 3 inches of front lift
- 1 inch of rear lift
- Front strut spacers
- Rear lift blocks with U-bolts
- Maximum tire size 33 inches
- Black finish
Rear lift blocks explained
Lift blocks are spacers that sit between the axle and the leaf springs, held in place by U-bolts. They raise the rear without changing the spring itself. A small rear lift like this one helps match the front, but the U-bolts need to be torqued and rechecked as the block settles.
Check the length of the brake lines and the driveshaft angle after the rear rises, because both change with axle position. Shock absorbers need enough travel for the new height, so inspect their mounts and bushings during installation. Heavier loads on the rear may flatten the springs over time, so recheck the ride height after a few months. Carry a torque wrench on the first few trips and check the U-bolt nuts.
- Recheck U-bolt nuts after the first drives
- Inspect brake lines at the new height
- Check shock travel and mounts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 65225K |
| UPC | 614901022223 |
| Type | Nitro leveling lift kit |
| Front lift height | 3 inches |
| Rear lift height | 1 inch |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 33 inches |
| Finish | Black |
Vehicle fitment
Check your year, model and trim against the fit range before ordering.
Check Pro Comp’s application list for your vehicle’s year, model and trim before ordering.
Installation notes
Finish the install with an alignment. Pro Comp recommends a specific front shock and rear shock with this kit, so check the shock lengths against the new ride height.








