Overview
The Pro Comp PLC09103 is a poly lift coil spacer that raises the front by a maximum of 1.5 inch, with a maximum tire diameter of 32 inch. It is a front-only lift that levels the front with the rear.
The spacer is made of polyurethane and fits at the front as a coil spring spacer. Confirm fit for your vehicle’s year, make and model before ordering.
Key features
- Maximum lift of 1.5 inch
- Maximum tire diameter of 32 inch
- Polyurethane coil spring spacer
- Front lift only
- Black finish
Front-only levels and tire choice
A front poly lift coil spacer raises only the front, so the front and rear come into line while the rear stays at its stock height. This works well for a truck that sits low in front. It also changes caster and camber, so the front suspension needs a closer look than a rear-only change would require.
Tire choice matters once the front is raised. Check the wheel and tire diameter against the 32 inch maximum for this kit, and confirm that the chosen tire clears the fender, the inner liner and the steering components at full lock. Polyurethane handles compression well, though it should be inspected for cracks or flattening as part of normal service.
Wheel offset and tire width matter as much as diameter, so a tire that fits one wheel may rub on another.
- Check tire diameter against the 32 inch maximum
- Test steering lock with the wheels installed
- Inspect polyurethane spacers at each service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLC09103 |
| UPC | 614901129182 |
| Maximum lift | 1.5 inch |
| Maximum tire diameter | 32 inch |
| Front lift method | Coil spring spacers |
| Rear lift | Front lift only |
| Spacer material | Polyurethane |
| Finish | Black |
Vehicle fitment
Confirm fit for your vehicle’s year, make and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit lifts the front only, the front alignment should be checked after the spacers are fitted, since the change in front height alters the caster and camber settings.









