Overview
The Fabtech FTS7182 is a rear twin tube hydraulic shock absorber for listed Jeep models: the 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ), 2004–2006 Wrangler (LJ) and 2005 Grand Cherokee (WJ). It is rated for a w/3.5 in. lift.
Both mounts are EB1, and the shock body is 2 inch in diameter with 9.65 in. of travel. The specifications table lists every measured length and component so you can check the fit against your current shock.
Key features
- High Flow 9 stage valving for controlled damping
- Closed cell foam insert inside the body
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Hydraulic twin tube design with no reservoir
- White powdercoat finish with a blue Fabtech logo
Rear shock mounts and bushings
Eye-style mounts like these are common on older Jeep rear suspensions. Because both ends use the same code, installation mostly depends on checking that the eyes and bushings on your vehicle are the right size and in good condition. Worn rubber bushings can allow the shock to move side to side, which reduces control and can wear the mounting hole.
A rear shock works with the springs, bushings and axle mounts around it. When replacing a shock, look over the mounting brackets for cracks and inspect the bolts for corrosion. Shock damping also changes with age, so a shock that feels firm when new may soften after several years of use on rough roads.
- Inspect bushings for splits or wear
- Check brackets for cracks
- Replace rear shocks in pairs
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7182 |
| UPC | 674866010758 |
| Position | Rear |
| Shock series | Performance Shock |
| Shock type | Twin tube, hydraulic, no reservoir |
| Shock body diameter | 2 inch |
| Collapsed length | 24.32 in. |
| Extended length | 14.67 in. |
| Travel length | 9.65 in. |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High Flow 9 stage |
| Insert | Closed cell foam |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Lift rating | w/3.5 in. lift |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
It fits the 2005 Jeep Grand Cherokee (WJ) in Laredo and Limited trims, the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The list does not include the 2007–2018 Wrangler (JK), the 1993–1998 Grand Cherokee (ZJ) or Grand Cherokee models other than the 2005 year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The EB1 upper and lower mounts are the same code, so check the eyes on your vehicle match before installing the shock.
What’s included
The package contains one shock absorber.
Not included: Check what your mounts need before installing.



















