Overview
The Skyjacker Softride Nitro Shock Absorber, part number N8059, is a front twin tube shock for suspension lifts of 5 to 9 in. It fits 1970 to 1976 Ford F-100, 1977 to 1979 Ford F-150 and F-250, 1979 Ford F-350, 1978 to 1979 Ford Bronco and 1987 to 1995 Jeep Wrangler (YJ). It is sized as a 4 inch front shock for those lifts.
This Nitro series shock is pressurized with 150 PSI of nitrogen gas and uses multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper. The 5/8 inch diameter hardened double chrome rod runs on urethane bushings, and compression control helps prevent air bubbles from forming. It is built for heavy-duty, severe off-road use and runs firm for most street driving.
Key features
- 150 PSI nitrogen gas pressurized
- Multi-stage velocity sensitive valving
- Twin tube construction with oversized piston head
- Internal rebound bumper
- 5/8 inch diameter hardened double chrome rod
- Urethane bushings and compression control
- White body with red polyurethane boot
Choosing a heavy-duty front shock
A front shock on a lifted truck has to manage a lot of travel, and a heavy-duty unit with a larger rod and gas charge helps it hold control on rough ground. Nitrogen-charged twin tube designs keep the oil from foaming when the shock heats up, which matters on long descents and rocky trails. Stiffer valving also means the front will feel firmer on pavement, so expect a different ride than a stock replacement.
Before buying, compare the collapsed and extended lengths with the lift you run. Check the mounting points on the older truck, since brackets and bushings can wear or bend over time. Front steering parts such as tie rod ends and the track bar often show wear at the same time, so inspect them while the shock is off.
- Measure installed length against the collapsed and extended lengths
- Check mounting brackets for cracks or bends
- Inspect tie rod ends and the track bar for play
- Replace worn bushings during the install
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8059 |
| UPC | 803696153063 |
| Shock series | Nitro Series |
| Position | Front |
| Charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Collapsed length | 16.56 in |
| Extended length | 28.750 in |
| Rod | 5/8 inch diameter, hardened, double chrome |
| Bushings | Urethane |
| Lift height | 5 to 9 in |
| Boot | Red polyurethane |
| Sold as | Individually |
Vehicle fitment
It fits 1970 to 1976 Ford F-100 (Base, Custom, Northland, Ranger and Ranger XLT), 1977 to 1979 Ford F-150 and F-250, 1979 Ford F-350, 1978 to 1979 Ford Bronco, and 1987 to 1995 Jeep Wrangler (YJ) in several trims.
The list does not include Ford F-150 models from 1980 onward, Jeep Wrangler TJ or JK models, or Jeep Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is made for suspension lifts of 5 to 9 in and does not lift the vehicle, so confirm your lift height before fitting it. Because the list covers older trucks, check the mounting points against the original shock first.
What’s included
One front shock absorber with a red polyurethane boot.
Not included: the matching shock for the other front corner, since each shock is sold individually.









