Overview
It is a rear hydraulic shock absorber for Chevrolet, GMC, Dodge and Nissan trucks and SUVs. It fits the 1999–2006 Chevrolet Silverado 1500, the 2000–2006 Chevrolet Tahoe, Suburban 1500, the 2000–2006 GMC Yukon and Yukon XL, the 1999–2003 GMC Sierra 1500, the 1994–2002 Dodge Ram 1500, 2500 and 3500, and the 2004–2013 Nissan Titan.
The shock measures 25.23 in extended and 15.22 in collapsed, with 10.01 in of travel. It has loop mounts at both ends and is rated for 0 to 1 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and it is covered by Pro Comp’s limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position, rated for 0 to 1 in. of lift
- Pro Comp Suspension limited lifetime warranty
Rear shock wear and load
Rear shocks on trucks and SUVs often work harder than front ones, since the rear carries cargo, passengers and trailer tongue weight. Over time the oil can thin and the valves can wear, which reduces control when the rear loads up or the truck crosses dips at speed. A rear shock that has been overloaded regularly tends to wear sooner than one used for daily driving alone.
When inspecting rear dampers, look for leaks, dents in the body and worn loop bushings. Check the rear springs, bump stops and the bushings in the control arms as well, since a worn part elsewhere can make the new shock wear faster. A steady, controlled rebound after a bump is a good sign the damper is working as it should.
- Rear shocks handle cargo and tow loads
- Check loop bushings for wear
- Inspect bump stops and springs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325543 |
| UPC | 614901042313 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 25.23 in |
| Collapsed length | 15.22 in |
| Travel length | 10.01 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Chevrolet Silverado 1500 models from 2007 onward (outside the Classic), Dodge Ram 3500 models and Ram 1500 models from 2002 and later fall outside this range. Confirm your vehicle’s year, model and trim before ordering.
Chevrolet Silverado 1500 models from 2007 onward (outside the Classic), Dodge Ram 3500 models, and Ram 1500 models from 2002 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is rated for 0 to 1 in. of lift, so check your truck’s ride height first. Because the lengths are set per vehicle, compare the 25.23 in extended and 15.22 in collapsed figures with the rear shock being replaced.
What’s included
One shock absorber, part 325543.
Not included: the dust boot.











