Overview
The Pro Comp Suspension ES3000 323553 is a hydraulic shock absorber for the 2007–2012 Toyota FJ Cruiser and the 2008–2009 Toyota Sequoia. It fits the FJ Cruiser Base, TRD Special Edition and Trail Teams Special Edition, and the Sequoia Limited, Platinum and SR5 versions.
The shock measures 23.81 in extended and 14.31 in collapsed, with 9.50 in of travel. It has loop mounts at both ends. It is finished in white and is not adjustable.
Its twin tube cellular gas body uses 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Pro Comp backs it with double welded mounts and its limited lifetime warranty. It is sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Off-road and highway use
A shock designed for a body-on-frame SUV has to manage both highway speeds and rough trails. On the road, damping keeps the body steady in crosswinds and over expansion joints. Off road, the shock absorbs repeated impacts from ruts and rocks, and it works best when the mounts stay tight and the rod stays clean.
After trail runs, inspect the shock body, rod and boot area for dents, dirt and oil film. Loose mounts can damage the body or bushings, so check hardware after rough driving. If the vehicle carries extra weight, such as a roof rack or gear, recheck the shocks since they may work harder over time.
- Dents on the body or rod
- Dirt packed around the rod
- Loose hardware after trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 323553 |
| UPC | 614901119183 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 23.81 in |
| Collapsed length | 14.31 in |
| Travel length | 9.50 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2007–2012 Toyota FJ Cruiser (Base, TRD Special Edition and Trail Teams Special Edition) and the 2008–2009 Toyota Sequoia (Limited, Platinum and SR5).
FJ Cruiser models from 2006 and from 2013 onward, and Sequoia models from 2010 and later, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 323553.
Not included: the dust boot.











