Overview
The Pro Comp ES3000 Series shock absorber, part number 320590, is a front twin tube cellular gas shock for a 6 in. lift, made for 1999–2006 Chevrolet and GMC full-size trucks and SUVs.
The ES3000 twin tube cellular gas design uses 10-stage velocity sensitive valving that adjusts to road conditions on and off the road. It has a 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts. Its type is hydraulic. Length and travel depend on the vehicle, and the shock is sold individually.
Key features
- ES3000 twin tube cellular gas design
- 10-stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop and double welded shock mounts
- Factory-style upper and lower mounts
- White finish; not adjustable; no remote reservoir
- Front position, for a 6 in. lift
- Carries a limited lifetime warranty.
Signs of a worn shock
A shock absorber controls how quickly the spring and axle move after a bump, which keeps the tires in contact with the road. When the damping fades, the truck may bounce several times after a dip, dive hard under braking or feel loose in corners. Oil seeping down the body of the shock usually means the internal seals have failed, and a leaking unit cannot control movement properly.
Front shocks take hard use on trucks that carry heavy loads or run rough trails. When the old shock is off, inspect the upper and lower mounts, bushings and hardware, because worn rubber or loose fasteners can make a new shock feel poor. Replacing both fronts together keeps the steering response even from side to side.
- Oil on the outside of the shock body
- Excess bounce after dips or bumps
- Uneven tire wear or cupping
- Clunking over small bumps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320590 (also shown as EXP320590) |
| UPC | 614901697803 |
| Product type | Shock absorber |
| Series | ES3000 |
| Position | Front |
| Lift height | 6 in. lift |
| Extended, collapsed length and travel | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Piston rod | 5/8 inch chrome hardened |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Type | Hydraulic |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp 320590 covers these vehicles: 2002–2006 Chevrolet Avalanche 1500 (Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71); 1999–2006 Chevrolet Silverado 1500 (Base, Hybrid, LS, LT, WT, Z71); 2007 Chevrolet Silverado 1500 Classic (Hybrid, LS, LT, WT); 2000–2006 Chevrolet Suburban 1500 (Base, LS, LT, LTZ, Z71); 2000–2012 Chevrolet Suburban 2500 (Base, LS, LT, LTZ); 2000–2006 Chevrolet Tahoe (Base, LS, LT, Limited, Z71); 1999–2006 GMC Sierra 1500 (Base, Denali, HT, Hybrid, SL, SLE, SLT, WT); 2007 GMC Sierra 1500 Classic (Hybrid, SL, SLE, SLT, WT); 2000–2006 GMC Yukon (Denali, SL, SLE, SLT); 2000–2006 GMC Yukon XL 1500 (Denali, SL, SLE, SLT); 2000–2012 GMC Yukon XL 2500 (SLE, SLT).
The list covers the model years shown. Later 2007 and newer Silverado, Sierra, Tahoe and Yukon models, apart from the Classic models listed, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect handling and braking, so professional installation is recommended. Tighten all fasteners to the torque values for your vehicle before driving.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Shocks are best replaced in pairs so the left and right sides match.
What’s included
One shock, sold individually.
Not included: Shock boots are not included.












