Overview
The Pro Comp Suspension 2561 is a dual steering stabilizer bracket kit. It is a mount-only kit that lets an ES2000 steering stabilizer shock be installed on the vehicle in a dual layout. It includes the bracket and mounting hardware, and it is boxed.
The bracket kit is the way to install an ES2000 steering stabilizer shock in a dual layout. Confirm the application for your vehicle before using the kit.
Key features
- Dual configuration bracket kit
- Mount only, no stabilizer shocks included
- Includes bracket and mounting hardware
- Boxed kit
Dual layout considerations
A dual layout places two steering stabilizer cylinders on the steering so that the load is shared between them. This helps when the steering needs more control than a single shock can give, especially with larger tires or heavier front-end components. The shocks should be mounted so each one works through a similar arc.
Set both cylinders to the same extension before tightening the bracket fasteners, so the steering stays centered. Check that the bracket is not rubbing on the frame or brake lines at full lock. Re-check the fastener torque after the first drives, and inspect the shock ends for leaks or play at each service. Keep spare bushings on hand, since dual setups wear the mounting points faster when they are out of balance.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 2561 |
| UPC | 614901030358 |
| Type | Mount only |
| Cylinder count | Dual |
| Brackets | Included |
| Hardware | Mounting hardware included |
| Fitment type | Direct fit |
Vehicle fitment
Verify the year, model and trim on your truck against this kit before buying. The kit mounts dual cylinders only, so it is not a replacement for a single stabilizer bracket.
The kit mounts dual cylinders only, so it is not a replacement for a single stabilizer bracket.
What’s included
One dual bracket kit with mounting hardware.
Not included: the stabilizer shocks.








