Overview
The Pro Comp DR36 Double Row LED Flood/Spot/Combo Pattern light bar, part number 76440, is a 37.75 inch double-row LED light bar. It has 80 Cree LEDs rated at 180 watts and 14,400 raw lumens, in a black finish with a clear lens.
The bar belongs to Pro Comp’s Explorer Series. Its 6063 extruded aluminum housing is waterproof and shock resistant, and Pro Comp rates the LEDs at 50,000+ hours of life.
The bar’s 37.75 inch length needs a clear mounting space. Choose a position where the beam is not blocked by the body or bumper, and where both sets of brackets can be secured firmly before the wiring is run.
Key features
- Double row of 80 Cree LEDs
- Flood, spot and combo beam pattern
- 180 watts and 14,400 raw lumens
- Waterproof, shock resistant 6063 extruded aluminum housing
- 50,000+ hour rated life span
- Wiring harness, switch and relay included
Wiring and mounting tips
A light bar this size draws considerable current, so it should run through a fused relay with a switch on the dash. Use wire thick enough for the load and keep the run short. Ground the bar to clean bare metal, since a poor ground is a common cause of dim or flickering output.
Mount the bar where the beam clears the bumper and body. Level aim suits most driving, and the brackets should be torqued so the bar does not shift on washboard roads. Check the bolts and the lens seal after rough trails to keep water and dust out of the housing.
- Run the bar through a fused relay
- Ground to clean bare metal
- Check bracket bolts after rough roads
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76440 |
| Type | Double row LED light bar |
| Overall dimensions | 37.75 x 3.23 x 3.51 inches |
| LEDs | 80 Cree LEDs |
| Power | 180 watts |
| Output | 14,400 raw lumens |
| Beam pattern | Flood, spot and combo |
| Housing | 6063 extruded aluminum |
| Lens color | Clear |
| Finish | Black |
| Mounting | Universal |
| Life span | 50,000+ hours |
Vehicle fitment
The light bar is universal fit and is not tied to a specific vehicle. It is a lighting accessory, so mount it where the beam is clear and the bar is secure.
Installation notes
The kit includes the wiring harness, switch, relay and two sets of mounting brackets with hardware. Run the harness through a fused relay circuit and check local rules on auxiliary driving lights before using them on public roads.
What’s included
The light bar with a wiring harness, switch, relay, two sets of mounting brackets and mounting hardware.









