Overview
The Cali Raised LED Prinsu roof rack light bar kit is a 43-inch single-row LED light bar with amber and white dual function lighting. It mounts to Cali Raised Prinsu roof racks using custom laser-cut brackets designed for a low profile against the windshield.
The brackets are CAD designed, CNC cut and bent, then powder coated in black semi-gloss. The low mounting keeps the bar close to the window, which is meant to limit wind noise and vibration.
Key features
- Dual function amber and white LED light bar
- Single row LED configuration
- Low profile brackets built for the Prinsu roof rack
- Black semi-gloss powder coated finish
- Hardware included for installation
Wiring and mounting checks
A light bar draws a lot of current, so a fuse and relay are commonly used to feed it directly from the battery. Route the wire away from moving parts, and secure it so it cannot rub on the rack. Wiring work is often the most time consuming part of the install, so plan it before the bar is bolted down.
Low mounting close to the window can help reduce wind noise, but the fairing and rack need to clear the bar. Check bolt fit and bracket alignment before tightening, and recheck fasteners after rough trails. Confirm local rules for auxiliary lights on public roads and aim the beam to avoid dazzling oncoming drivers. Keep the lens clean and inspect the seals after heavy rain or washing.
- Fuse the feed close to the battery
- Route wiring away from moving parts
- Re-check bracket bolts after rough trails
Specifications
| Brand | Cali Raised LED |
|---|---|
| Part number | C/R39302156910634 |
| Length | 43 inches |
| LED row configuration | Single row |
| Light function | Dual function, amber and white |
| Bracket finish | Black semi-gloss powder coat |
| Fitment | Universal fit |
The light bar is a 43-inch single row unit with dual amber and white function, and the wiring harness is the part most likely to need attention at installation. Connecting the harness to the OEM switch requires modification, so plan that work before the rack is mounted. The brackets are laser cut, CAD designed and powder coated, and they sit low against the window to keep the bar close to the rack.
Because the brackets sit low against the window, the bar stays close to the rack. This placement is designed to keep wind noise and vibration down at highway speed.
Vehicle fitment
This light bar is not tied to a specific vehicle. Its brackets are made for the Cali Raised dual function light bar and the Prinsu roof rack, and Cali Raised does not guarantee them for other products.
Check that your roof rack is a Cali Raised Prinsu rack before ordering the brackets.
Installation notes
Installing the kit requires modifying the wind fairing on the rack, and connecting the wiring harness to the OEM switch also requires modification. Plan for this wiring work before you mount the bar. Wire light bars through a fuse and relay, and check your local rules for using auxiliary lights on public roads.
What’s included
The 43-inch dual function LED light bar, the low profile brackets and installation hardware.









