Overview
The Pro Comp 2×2 Square S4 GEN3 LED Flood Lights, part number 76413P, are sold as a set of two 3 x 3 inch flood lights. Each light is rated at 20 watts and 1920 lumens, with a black housing and a flood beam pattern.
The lights are universal mounting and universal fit. They have an IP67 housing with a shockproof 3800 polyester powder coat case, and the LEDs have a life span of 50,000-plus hours.
A flood beam spreads light across a wide area, which suits close-range lighting. The pair is sold as two 3 x 3 inch lights with black housings, so both lights match when mounted together.
Pro Comp’s wiring harness, switch and relay come with the pair, so the set is ready to wire once the mounting positions are chosen. Check local rules on auxiliary lighting before using the lights on public roads.
Key features
- Set of two lights
- Flood beam pattern
- 20 watts and 1920 lumens per light
- IP67 housing with a 3800 polyester powder coat case
- Universal mounting
Pairing flood lights
A flood beam spreads light across a wide area, which suits close-range work such as lighting the sides of a trail, a campsite or a work area. Two matched lights give an even spread across the width of a vehicle, so mount them at the same height and angle to avoid a bright patch on one side.
Consider where the lights will sit relative to the grille, hood and bumper, and keep the harness routed away from heat and moving parts. Flood beams are most useful at low speed, so aim them to light the ground near the vehicle rather than far ahead.
- Mount both lights at the same height
- Aim to light the ground near the vehicle
- Route the harness away from heat sources
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76413P |
| Type | Light pod |
| Sold as | Set of 2 |
| Size | 3 x 3 inch |
| Bulb type | LED |
| Watts | 20 per light |
| Lumens | 1920 per light |
| Beam pattern | Flood |
| Housing color | Black |
| Mounting location | Universal |
Vehicle fitment
The flood lights are universal fit and are not tied to a particular vehicle. Choose mounting points that suit the flood beam.
Installation notes
The kit includes a wiring harness, switch, relay, mounting brackets and hardware. Wire the lights through a relay and check local rules on auxiliary lighting before use on public roads.
What’s included
Two lights with a wiring harness, switch, relay, mounting brackets and mounting hardware.




















