Overview
The Pro Comp Suspension 69090 is a large competition urethane bump stop. It is built on a large, reinforced steel mounting plate that Pro Comp designed to withstand rough terrain.
Key features
- Large competition size
- Reinforced steel mounting plate
- Urethane bump
Measuring for clearance
A bump stop works only when it contacts the axle or frame at the right point in the suspension travel. Before mounting, look at the space between the mounting plate and the moving component, and make sure the bump stop will not bind when the suspension is compressed or the axle articulates. Pay attention to brackets, brake lines, and wiring that may pass through the same area.
Urethane bump stops compress under load and gradually lose their shape after years of hard use. Inspect the bump and the plate at each service interval, looking for cracks, flattened areas, or bolts that have worked loose. A large plate can carry more load into the mounting point, so check the welds or bolt holes on the vehicle before reusing old hardware.
- Check clearance with the suspension at full compression
- Inspect the urethane for cracks or flattening
- Torque mounting bolts after the first trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69090 |
| UPC | 614901690903 |
| Type | Urethane bump |
| Mounting plate | Reinforced steel |
Vehicle fitment
It is a universal fit bump stop, so check the mounting location and clearance on your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One large competition urethane bump stop with a steel mounting plate.











