Overview
The Currie CE-9122F4 is a front urethane bumpstop stated to fit 2-4″ lifts. Currie marks it universal fit, and no year, make or model is named for it.
Part number CE-9122F4 and UPC 700008370951 identify this bumpstop from Currie.
Key features
- Front bumpstop position
- Urethane bump type
- It is designed for 2-4 inch lifts.
Front bumpstop fit and wear
A front bumpstop cushions the suspension at the end of its travel, which matters most on trucks with a lift or larger tires where the suspension can compress farther. Urethane is commonly used for this job because it holds up to repeated impacts, but it still ages and can crack after long exposure to heat and sun.
Before installing, measure the mounting area and make sure the stop contacts the axle or frame where intended without rubbing a hose, brake line or wire. Lift height changes the compression point, so the bumpstop should be matched to the suspension setup. After a few weeks of driving, check the contact marks and mount condition.
- Check mounting position and contact point
- Inspect for cracks or missing chunks
- Look for rubbing on nearby lines
- Replace if the urethane has split
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9122F4 |
| UPC | 700008370951 |
| Type | Urethane bump |
| Lift height | 2-4″ lifts |
Vehicle fitment
No specific vehicle is named for this bumpstop. Because the fit is stated only by lift height, match it to your truck’s lift and bumpstop position first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is one front urethane bumpstop, with no extra hardware included.









