Overview
The Pro Comp 55200 is a pair of boxed front lower control arms for Jeep applications. The boxed design adds weld area around the bushing eyelet for improved strength. The part is the front lower arm, with the part number EXP55200.
The arms are sold as a pair and are formed to eliminate tire scrub at steering lock. They fit the 1984-2001 Jeep Cherokee XJ, the 1993-1998 Jeep Grand Cherokee ZJ, the 2004-2006 Jeep Wrangler LJ and the 1997-2006 Jeep Wrangler TJ, in the trims named in the fitment section.
Key features
- Boxed design
- Increased weld area around the bushing eyelet
- Front lower arm position
- Front arms formed to eliminate tire scrub at steering lock
- Sold as a pair
- Direct-fit design for the listed Jeep models
Alignment after arm replacement
Control arms locate the axle and carry braking and steering loads, so any change to them affects how the front end tracks. After new arms are bolted in, the alignment should be set and checked, because caster and toe can shift as the arms settle into their bushings. A road test on a flat, straight stretch shows whether the steering wheel sits centered and whether the truck pulls to one side.
Bushings wear over time, and worn bushings let the arm move under load, which shows up as loose steering and uneven tire wear. Inspect the bushings at each service, look for cracked rubber or play at the ball joints, and replace worn parts before they damage the new arms.
Mounting direction also matters. Arms mounted bend down or upside down change the break-over angle and can shift the geometry, so decide the direction before the install and recheck the alignment after any change.
- Check bushings for cracks at each service
- Recheck alignment after any ride height change
- Inspect ball joints when replacing arms
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55200 |
| Listed part code | EXP55200 |
| UPC | 614901114775 |
| Position | Front lower |
| Design | Boxed lower control arm |
| Sold as | Pair |
| Fitment type | Direct fit |
Vehicle fitment
The XJ fits the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. The ZJ fits the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
The list also includes the 2004-2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims, and the 1997-2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lower control arms carry the axle and the steering load, so check front alignment after the install. The arms can be mounted bend down or upside down, and the upside down option can improve break-over angle, so check the direction against the vehicle and intended ride height.
What’s included
The pair of boxed front lower control arms is included. Check the parts list for bushings and other hardware before starting the install.










