Overview
The Pro Comp PXA5161-7973 is a 17×9 aluminum split-spoke wheel from the Pro Comp 61 Series, finished in satin black milled with a 5 on 5 bolt pattern. The design is also called the Cognito. It is sold as one wheel.
The 61 Series is built with low-pressure casting, which gives strength with light weight, and the alloy wheels are rated from 2500 to 3650 lbs per wheel. This wheel is 9 inches wide with a center bore of 72, an offset of -6 and a backspacing of 4.75.
Key features
- Low-pressure cast aluminum construction
- Split-spoke face style
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern with a center bore of 72
- Offset -6 with 4.75 backspacing
- Satin black milled finish
Split-spoke face and cleaning
Split-spoke faces open the wheel so more of the brake caliper and rotor show through. This makes visual checks easier, but the spoke gaps do not change offset or clearance. The gaps do collect mud and grit, so a brush that reaches between the spokes keeps the face clean and makes it easier to spot cracks or loose hardware.
Satin black milled finishes are sensitive to harsh chemicals. Use a pH-neutral wheel cleaner and a soft brush, then rinse thoroughly and dry to prevent water spots. Removing brake dust from the inner barrel regularly keeps the finish looking even and makes inspection of the mounting area simpler.
- Use a pH-neutral cleaner on the milled finish
- Brush between the spokes after off-road runs
- Inspect the lug holes for cracks at each tire rotation
- Keep brake dust off the inner barrel
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5161-7973 |
| Series | 61 Series |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. It is a universal design, not built for a particular truck or Jeep model. A 5 on 5 hub with a 72 center bore is the match to confirm, followed by clearance for the -6 offset at the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the hub for a 5-lug, 5 on 5 layout before ordering. The 72 center bore has to match the hub pilot so the wheel centers properly. Test-fit the rim with the tire to confirm the brake caliper and suspension have room.
What’s included
One 17×9 aluminum wheel. Lug nuts and a center cap are supplied separately.











