Overview
The Pro Comp K2188B is a 6-inch stage 2 radius arm kit with ES9000 shocks for the Ram 3500 with the 5.7-liter gas engine. It fits 2013 to 2018 Ram 3500 trucks. The front uses coil springs with replacement radius arms, and the rear uses blocks and U-bolts. The lift range is 4 to 6 inches.
The stage 2 designation refers to the replacement radius arms, which take the place of the factory arms rather than only dropping them. The kit includes a pitman arm for steering correction, brake line extension brackets, sway bar links and bump stop extensions.
A stage 2 radius arm kit replaces the factory radius arms rather than only dropping their mounts. Because the new arms take the place of the originals, the front suspension changes more than it does with a drop-only kit, so the alignment and steering setup matter more after installation. The sway bar links and bump stop extensions are part of the same front work.
Key features
- 6-inch lift
- Replacement radius arms at the front
- Coil springs at the front
- ES9000 shocks included
- Pitman arm for steering correction
- Brake line extension brackets
- Rear blocks with U-bolts
Stage 2 setup and what changes
Replacing the radius arms, instead of only dropping their mounts, changes more of the front suspension. The arm angle, bushing position and spring load all shift together, so the front end is best thought of as one assembly. Ride quality and steering response can feel different from a drop-only setup, and that is normal for a complete arm replacement.
Good habits help. Keep a record of the front alignment readings and recheck them after the first few weeks of driving. Look at the front tires for uneven wear across the axle, and check the steering components for play. If the truck pulls, wanders or wears one edge of a tire faster than the other, have the front inspected before continuing.
- Keep a record of alignment readings
- Inspect the front tires for uneven wear
- Check steering components for play
- Look at the front bushings after rough trails
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2188B |
| UPC | 700008182661 |
| Type | Stage 2 radius arm suspension kit |
| Lift height | 6 inches, listed range 4 to 6 inches |
| Front shocks | ES9000 |
| Rear lift | Block and U-bolt |
| Engine | 5.7-liter gas |
| Fitment | Direct fit |
Vehicle fitment
It fits 2013 to 2018 Ram 3500 trucks with the 5.7-liter gas engine.
Earlier Ram 3500 model years and Ram 2500 trucks are not covered by the stated years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the front radius arms changes the suspension geometry, so have the front alignment and steering set after installation. Check the rear blocks and U-bolts for proper torque after the first drive.









