Overview
The Pro Comp K5150B is a long-travel suspension system for the Toyota Tundra, offering 14 inches of total travel and a 5-inch track width increase. It is built around ductile cast iron upper and lower extended A-arms with oversized OE-style pivot bushings, and it raises ride height by 3 to 4 inches.
Extended tie rod ends and CV axles accommodate the wider track, and forged tie rod ends are included. The kit adds a lift shackle, an add-a-leaf mini pack and 2-inch rear wheel spacers. Shocks are sold separately. Internal and external fender modification is required to reach 14 inches of travel with 35-inch tires.
Key features
- 14-inch total travel
- Ductile cast iron upper and lower extended A-arms
- Oversized OE-style pivot bushings
- Forged tie rod ends and extended length tie rod ends
- 5-inch track width increase
- Lift shackle, add-a-leaf mini pack and 2-inch rear wheel spacers
Living with a long travel kit
Long travel suspension changes how the truck behaves on rough ground. Extra wheel travel lets the tires keep contact over ledges and washouts, which helps traction on uneven trails. On pavement the wider track and higher ride height shift steering feel and crosswind response, so expect some change in handling until the setup is dialed in.
Shock selection matters more with extended travel. Shocks need enough length and valving for the new range of motion, so plan to pair the arms with a shock package sized for this setup. Extended A-arms also load the bushings differently, so inspect the pivots and sleeves periodically for cracking, grease loss or play.
After the first few trail runs, re-check wheel nuts, shackle bolts and the spacer hardware. Look for rubbing at the fenders and tire contact at full articulation.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5150B |
| UPC | 700007365391 |
| Lift height | 4 inch (ride height increased 3 to 4 inches) |
| Total travel | 14 inch |
| Track width increase | 5 inch |
| Rear wheel spacers | 2 inch |
| Shocks | Sold separately |
Vehicle fitment
It is offered for the Toyota Tundra. Confirm fit for your vehicle’s model year and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering, and confirm the fender modification needed for 35-inch tires.
Installation notes
Fender modification, internal and external, is needed to allow 14 inches of travel with 35-inch tires, so plan that work before installation. The wider track changes steering and driveline geometry, so an alignment and a driveline angle check are needed afterward.
What’s included
The kit includes the upper and lower extended A-arms, forged tie rod ends, extended length tie rod ends, CV axle components, the lift shackle, the add-a-leaf mini pack, and 2-inch rear wheel spacers. Shocks are not included.




























