Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K1085BP, is a crossmember and knuckle lift system for 2500 HD Chevrolet and GMC trucks. The front lift is 6 inches and the rear lift is 3.5 inches, with lift blocks and U-bolts at the rear.
The front uses a heavy-duty, laser-cut crossmember and steering knuckles that are quarter-inch thick. The kit clears 35-inch tires with no trimming. It is a bolt-on install that needs no welding or drilling and no cutting of the differential. The front shock is a Pro Runner unit rather than the ES9000 used in the K1085B.
Key features
- 6-inch front lift and 3.5-inch rear lift
- Crossmember and steering knuckle system
- Clearance for 35-inch tires with no trimming
- Heavy-duty, laser-cut crossmember
- Driveline spacers, bump stop extensions and skid plate included
- Pro Runner front shock
Crossmember lift considerations
Crossmember and knuckle front systems change the geometry of the front axle, so the steering and brake components deserve a closer look after installation. Brake lines, steering linkage and the bump stops all shift when the front rises. Inspect each one at full steering lock and under suspension compression before the truck sees hard use.
The skid plate and driveline spacers that come with the kit protect parts that sit lower once the lift is in. A skid plate is only useful when it is fastened securely, so check its bolts after rough trail sections. Keeping a basic toolkit with spare fasteners makes those checks easier on the trail.
- Inspect brake lines for stretch or chafing
- Check steering stop clearance at full lock
- Torque all fasteners after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1085BP |
| UPC | 70000637806 |
| Lift height | 6 inches front, 3.5 inches rear |
| Lift height range | 5 to 6.99 inches |
| Front lift | Crossmembers and steering knuckles |
| Steering correction | None |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | Pro Runner |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
Match your truck’s year, model and trim to the fitment before ordering. The kit is built for 2500 HD Chevrolet and GMC trucks.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front crossmember and knuckles replace factory parts, have the alignment and driveline angles checked after installation.
What’s included
The kit includes the front crossmember and steering knuckles, rear lift blocks with U-bolts, driveline spacers, bump stop extensions, a skid plate and Pro Runner front shocks.









