Overview
The Pro Comp K5089B is a 6-inch Stage 1 lift kit with rear ES9000 shocks for the 2016–2018 Toyota Tacoma. Its extended steering knuckles keep the rack and pinion steering unit in the factory location, and the crossmembers are made to be rock-proof.
The design maintains proper CV axle angles and allows full compression and extension travel without binding the ball joints. The rear lift uses lift blocks with add-a-leafs and U-bolts, and the kit includes a front strut spacer and differential drop brackets.
Key features
- 6-inch lift height from a Stage 1 kit
- Extended steering knuckles
- Rock-proof crossmembers
- Front strut spacer and differential drop brackets
- Sway bar drop brackets
- Lift block with add-a-leafs and U-bolts
Driving after a lift
Raising a truck changes how the suspension moves, and the effects show most on uneven ground. Longer control components and steering parts alter the angles that carry power to the wheels, so the CV joints work through a different range than the factory setup. During the first weeks of driving, watch for rubbing at full steering lock and at full suspension droop, and listen for vibration under acceleration.
On pavement, a taller stance changes how the truck leans in corners and how the steering feels at speed. Rear lift blocks and add-a-leafs change the pinion angle, which is why the driveshaft is worth checking after the first trips. Fasteners on the sway bar drop and differential drop brackets should be rechecked after rough trail use, since vibration can loosen them over time.
- Recheck fasteners after the first off-road outings
- Inspect CV boots for tears during regular service
- Look for bump stop contact on rough roads
- Watch brake lines for stretch at full droop
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5089B |
| UPC | 700007619161 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Crossmember |
| Front control | Extended steering knuckles, crossmembers and strut spacer |
| Rear lift | Add-a-leaf with lift blocks and U-bolts |
| Rear shocks | ES9000 |
| Front shocks | None listed |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport versions.
The list covers the 2016 through 2018 model years, so the 2015 and earlier Tacomas and the 2019 and newer generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Extended steering knuckles and the rock-proof crossmembers change the front geometry, so have the alignment checked and the driveline angles measured once the kit is installed.
What’s included
The kit includes extended steering knuckles, rock-proof crossmembers, a front strut spacer, differential drop brackets, the sway bar drop, lift blocks with add-a-leafs and U-bolts, and ES9000 rear shocks.









