Overview
The Pro Comp 42 Series Blockade 20×9.5 wheel, part number PXA8142-29570, is a 20-inch aluminum split spoke wheel that is 9.5 inches wide. It is an eight-lug version with an 8 on 170 bolt pattern and a gloss black finish with milled detail.
The wheel has a 125 center bore, a -6 offset and a backspacing of 5. Its construction is low-pressure cast aluminum, rated for 2500 to 3650 lbs per wheel. Because no vehicle is assigned, the eight-lug hub and caliper room decide fit.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9.5-inch width
- 8 on 170 bolt pattern
- Center bore 125
- Offset -6 and backspacing 5
- Gloss black with milled finish
Gloss black and milled finish care
Gloss black with a milled finish has a glossy face and machined recesses. Road grime collects in the milled areas, so a soft brush and a pH-neutral wheel cleaner work better than harsh chemicals. Rinse thoroughly and dry the recesses to prevent water spots and dull patches.
Avoid abrasive pads and strong acid cleaners, which can dull the gloss and scratch the edges of the milled detail. Trail mud and salt can cling in the recesses, so rinse after off-road use. Inspect the finish each season for chips or lifting near the lug holes, where touch-up sealing helps.
Brake dust is most visible on glossy black surfaces, so a cleaner made for brake dust keeps the gloss clear over time.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA8142-29570 |
| Wheel diameter | 20 inches |
| Wheel width | 9.5 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | -6 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Split spoke |
| Finish | Gloss black, milled |
| Construction | Aluminum |
| Series | 42 Series Blockade |
Vehicle fitment
This wheel is not assigned to a vehicle. The 8 on 170 pattern and 125 center bore must match an eight-lug hub, and the -6 offset must be measured against the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight-lug 170 hubs are not interchangeable with five- or six-lug patterns, so confirm the hub layout first. Check caliper room on the 20-inch wheel with the tire installed.
The 8 on 170 pattern is an eight-lug layout, and the 125 center bore must seat on the hub. The 9.5-inch width and -6 offset affect tire fit and the wheel’s position against the caliper, so measure both before mounting a tire.
Gloss black with a milled finish is the visual look, while the bolt pattern, center bore and offset decide whether the wheel mounts.
What’s included
One 20×9.5 wheel in gloss black with a milled finish is included. Check your hub hardware before mounting.












