Overview
The Pro Comp MX2040B is a 4-inch travel air bump stop designed to add compression control when the suspension bottoms out while keeping ride quality. It is an emulsion style unit, with nitrogen gas and hydraulic oil mixed and pressurized to 200 psi. It comes with a universal weld-on mount for custom installation.
Key features
- 4-inch travel
- Emulsion style with nitrogen and hydraulic oil
- Nitrogen pressurized to 200 psi
- 1.250-inch induction hardened, chrome plated rod
- Hardened billet AL6061 piston
- 2.0-inch outer diameter seamless tube
- CNC machined, laser etched anodized aluminum bump cap and end cap
Bump stop basics
A bump stop limits how far the axle or suspension can compress before the frame or body meets the axle. It reduces harsh impacts on shocks and springs when the suspension reaches the end of its travel. A stop that contacts too early can change ride feel, while one placed too late gives little protection. The contact point is what makes the difference, so placement is as important as the part itself.
Plan the installation around the rest of the vehicle. Brake lines, wiring, fuel lines and tires can all move at full compression, so the stop must sit where nothing gets pinched. An air bump stop works alongside shocks and springs, and it is most useful on trucks that see rough trails or hard landings. Inspect the stop after each trip and check the welds for cracks.
- Check clearance to brake lines and wiring
- Look for dents, oil seepage and cracked welds
- Recheck the contact point after hard trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | MX2040B |
| UPC | 614901127324 |
| Travel | 4 inches |
| Type | Air bump |
| Rod diameter | 1.250 inches |
| Tube outer diameter | 2.0 inches |
| Gas charge | Nitrogen, 200 psi |
| Mount | Universal weld-on |
| Fitment type | Universal |
The 2.0-inch outer diameter seamless tube is combined with the rod and piston, and the body is zinc plated for a protective finish. The bump cap and end cap are CNC machined, laser logo etched anodized aluminum.
Vehicle fitment
It is a universal fit with a weld-on mount, so no specific vehicle is named. Because the mount is welded, check the mounting location and clearance on your vehicle before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bump stop uses a universal weld-on mount, so it must be welded in place. Position it so it contacts the axle or frame at the intended point of travel.
What’s included
- Air bump stop with bump cap and end cap
- Universal weld-on mount










