Overview
The Crown Automotive 52040007 is a rear spring snubber, a rubber bump stop for the driver or passenger side of a Jeep rear spring. Crown makes it as a replacement part, and each package holds one piece.
A spring snubber cushions the spring as it compresses, limiting travel and softening impacts. Check which side and position you need against the snubber you are replacing.
Key features
- Rubber construction
- Rear position
- Driver or passenger side
- One piece per package
Spring snubber basics
A rear spring snubber is a rubber stop that limits how far the spring can compress. It takes the load at full compression, which protects the spring, shackle and nearby parts from harsh impacts. On a leaf-spring Jeep, a worn snubber often lets the axle bottom out with a thud, especially over sharp bumps or on rough trails.
When replacing one, work on each side separately so the axle stays where it belongs and the spring is not moved unevenly. Clean the mounting area and check the bracket for cracks or bent metal before installing. Rubber stops age with heat, sun and oil exposure, so replacing a snubber that has cracked or flattened helps restore the travel the suspension was designed to have.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52040007 |
| UPC | 848399014860 |
| Material | Rubber |
| Position | Rear, driver or passenger side |
| Quantity | 1 piece |
Vehicle fitment
Years, models and trims are absent for this spring snubber. Crown positions it as a direct-fit replacement for Jeep vehicles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the driver or passenger side to the old snubber before removing it, and check the mounting location and hardware on your vehicle first.
What’s included
One rear spring snubber (driver or passenger side).









