Overview
The Fabtech FTS22104 is a 5.5 inch lift block and U-bolt kit with the hardware needed to mount two blocks. It is a universal fit kit, so confirm the vehicle it suits before ordering.
Key features
- Two lift blocks rated for 5.5 inches of lift
- Four U-bolts
- Eight nylock tall nuts and eight thick flat washers
- Fabtech part number FTS22104
Lift blocks and U-bolt checks
Lift blocks change the axle position under the leaf springs, so the U-bolts carry more of the load at the new height. Clamp force is what keeps the block in place, and it settles as the nuts bed in. Check each nut after the first drives and at regular intervals, because loose hardware is a common cause of lift block problems.
Before installing, confirm the block’s seat on the axle and spring pack is clean and that the blocks sit square. Thread condition and torque matter, so follow the torque steps for your setup. When inspecting, look for cracked welds, stretched U-bolts or worn threads. Replace hardware that shows any of these signs.
- Check nut torque after the first few drives
- Inspect U-bolts for stretching or thread damage
- Replace worn or cracked hardware
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22104 |
| UPC | 674866020726 |
| Lift | 5.5 inches |
| Lift blocks | 2 |
| U-bolts | 4 |
| Nylock tall nuts | 8 |
| Thick flat washers | 8 |
Vehicle fitment
This kit is a universal fit, with no year, make, model or chassis code tied to it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two lift blocks, four U-bolts, eight nylock tall nuts and eight thick flat washers.





